INA, Eksenel Bilyalı Rulman, KH16PP, İç Çap: 16mm, Dış Çap: 24mm
Teknik Belgeler
Özellikler
Marka
INAİç Çap
16mm
Dış Çap
24mm
Bilezik Genişliği
30mm
Bilyalı Mil Yatağı Tipi
Doğrusal
Sızdırmazlık Düzeni
Her İki Tarafı Sızdırmaz
Bearing Clearance
CN
Malzeme
Çelik
Bilya Malzemesi
Çelik
Kafes Malzemesi
Poliamit
Sıraların Sayısı
1
Statik Yük Değeri
910N
Dinamik Yük Değeri
1060N
İç Çap Tipi
Paralel
Partial Bearing Code
KH16PP
Bilezik Tipi
Düz
Menşe
Germany
Ürün Ayrıntıları
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.
INA
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
INAİç Çap
16mm
Dış Çap
24mm
Bilezik Genişliği
30mm
Bilyalı Mil Yatağı Tipi
Doğrusal
Sızdırmazlık Düzeni
Her İki Tarafı Sızdırmaz
Bearing Clearance
CN
Malzeme
Çelik
Bilya Malzemesi
Çelik
Kafes Malzemesi
Poliamit
Sıraların Sayısı
1
Statik Yük Değeri
910N
Dinamik Yük Değeri
1060N
İç Çap Tipi
Paralel
Partial Bearing Code
KH16PP
Bilezik Tipi
Düz
Menşe
Germany
Ürün Ayrıntıları
Linear Ball Bearings
INA from Schaeffler linear ball bearings KH and linear ball bearing and housing units of the compact range have a small radial design envelope and are economical. Their low radial section height automatically makes them attractive for applications in which only a small amount of radial space is available.
The bearings have an outer ring with openings and contain a ball and cage assembly with a plastic cage. The outer ring is formed and hardened. The balls undergo return travel along the openings in the outer ring.
The bearings are available in an open version and with lip seals on both sides (suffix PP). The end face seals have two seal lips; the outer lip prevents the ingress of contamination, the inner lip retains the lubricant in the bearing.