Teknik Belgeler
Özellikler
Marka
InfineonMotor Tipi
BLDC
Maksimum IGBT Kollektör Akımı
8A
Maksimum Kollektör Emitör Gerilimi
28 V
Montaj Tipi
Yüzeye Monte
Paket Tipi
DSO
Pim Sayısı
36
Maksimum Çalışma Besleme Gerilimi
18 V
Minimum Çalışma Besleme Gerilimi
8 V
Tipik Anahtarlama Frekansı
25kHz
Yükseklik
2.45mm
Genişlik
7.6mm
Minimum Çalışma Sıcaklığı
-40°C
Boyutlar
12.8 x 7.6 x 2.45mm
Maksimum Çalışma Sıcaklığı
+150°C
Uzunluk
12.8mm
Menşe
Austria
Ürün Ayrıntıları
Motor Driver ICs, Infineon
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineons single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.
Motor Controllers & Drivers, Infineon
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
128,269 TL
Each (On a Reel of 1000) KDV Hariç
153,923 TL
Each (On a Reel of 1000) KDV Dahil
1000
128,269 TL
Each (On a Reel of 1000) KDV Hariç
153,923 TL
Each (On a Reel of 1000) KDV Dahil
1000
Teknik Belgeler
Özellikler
Marka
InfineonMotor Tipi
BLDC
Maksimum IGBT Kollektör Akımı
8A
Maksimum Kollektör Emitör Gerilimi
28 V
Montaj Tipi
Yüzeye Monte
Paket Tipi
DSO
Pim Sayısı
36
Maksimum Çalışma Besleme Gerilimi
18 V
Minimum Çalışma Besleme Gerilimi
8 V
Tipik Anahtarlama Frekansı
25kHz
Yükseklik
2.45mm
Genişlik
7.6mm
Minimum Çalışma Sıcaklığı
-40°C
Boyutlar
12.8 x 7.6 x 2.45mm
Maksimum Çalışma Sıcaklığı
+150°C
Uzunluk
12.8mm
Menşe
Austria
Ürün Ayrıntıları
Motor Driver ICs, Infineon
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineons single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.