Teknik Belgeler
Özellikler
Marka
InfineonMotor Tipi
BLDC
Çıkış Yapılandırması
Yarım Köprü
Maksimum IGBT Kollektör Akımı
50A
Maksimum Kollektör Emitör Gerilimi
18 V
Montaj Tipi
Yüzeye Monte
Paket Tipi
TO-263
Maksimum Çalışma Besleme Gerilimi
18 V
Pim Sayısı
7
Minimum Çalışma Besleme Gerilimi
8 V
Tipik Anahtarlama Frekansı
25kHz
Yükseklik
4.4mm
Genişlik
9.25mm
Maksimum Çalışma Sıcaklığı
+150°C
Uzunluk
10mm
Minimum Çalışma Sıcaklığı
-40°C
Boyutlar
10 x 9.25 x 4.4mm
Ürün Ayrıntıları
Motor Driver ICs, Infineon
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineons single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.
Motor Controllers & Drivers, Infineon
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
183,739 TL
Each (On a Reel of 1000) KDV Hariç
220,487 TL
Each (On a Reel of 1000) KDV Dahil
1000
183,739 TL
Each (On a Reel of 1000) KDV Hariç
220,487 TL
Each (On a Reel of 1000) KDV Dahil
1000
Teknik Belgeler
Özellikler
Marka
InfineonMotor Tipi
BLDC
Çıkış Yapılandırması
Yarım Köprü
Maksimum IGBT Kollektör Akımı
50A
Maksimum Kollektör Emitör Gerilimi
18 V
Montaj Tipi
Yüzeye Monte
Paket Tipi
TO-263
Maksimum Çalışma Besleme Gerilimi
18 V
Pim Sayısı
7
Minimum Çalışma Besleme Gerilimi
8 V
Tipik Anahtarlama Frekansı
25kHz
Yükseklik
4.4mm
Genişlik
9.25mm
Maksimum Çalışma Sıcaklığı
+150°C
Uzunluk
10mm
Minimum Çalışma Sıcaklığı
-40°C
Boyutlar
10 x 9.25 x 4.4mm
Ürün Ayrıntıları
Motor Driver ICs, Infineon
Infineon offer a variety of drivers that offer a solution for motor controls and drives. The selection includes Integrated Full-Bridge, Powertrain H-Bridge, TrilithIC, NovalithIC as well as Servo and Stepper motor drivers.The H-bridge is suited to applications such as DC brush motors. The TrilithIC integrates two high-side and two low-side switches which are meant to drive high-current DC motors in an H-bridge arrangement. Infineons single half-bridge drivers like NovalithIC are intended for automotive and industrial demands. Whereas the servo driver is widely used in head light beam control and the Stepper motor driver is for driving bipolar stepper motors.