Teknik Belgeler
Özellikler
Marka
InvenSenseHassasiyet
-44dB
Yönelme
Tüm Yönlü
Standart Çalışma Gerilimi
1.5 → 3.36V
Montaj Tipi
Yüzeye Monte
Çıkış Empedansı
0.2kΩ
Sinyal - Gürültü Oranı
62dB(A)
Maksimum Besleme Akımı
0.25mA
Boyutlar
4.82 x 3.86 x 1.1mm
Yükseklik
1.1mm
Maksimum Frekans
20kHz
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Frekans
28Hz
Minimum Çalışma Sıcaklığı
-40°C
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
Analogue MEMS Microphone - INMP411, InvenSense
The InvenSense INMP411 high SPL microphone presents a low noise, low power bottom port device with an analog output. The MEMS microphone has a linear response up to 131dB SPL it also incorporates an impedance converter and an output amplifier. Featuring high SNR (Signal to Noise Ratio), extended wideband frequency response and it is pin compatible with the IMP401. This omnidirectional (omni) microphone is Ideal in near and far field applications also a range of products like digital video cameras, Bluetooth headsets, tablet computers, fire and safety radios and teleconferencing systems.
Audio & Acoustic Sensors, Invensense
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
141,857 TL
Each (Supplied as a Tape) KDV Hariç
170,228 TL
Each (Supplied as a Tape) KDV Dahil
2
141,857 TL
Each (Supplied as a Tape) KDV Hariç
170,228 TL
Each (Supplied as a Tape) KDV Dahil
2
Teknik Belgeler
Özellikler
Marka
InvenSenseHassasiyet
-44dB
Yönelme
Tüm Yönlü
Standart Çalışma Gerilimi
1.5 → 3.36V
Montaj Tipi
Yüzeye Monte
Çıkış Empedansı
0.2kΩ
Sinyal - Gürültü Oranı
62dB(A)
Maksimum Besleme Akımı
0.25mA
Boyutlar
4.82 x 3.86 x 1.1mm
Yükseklik
1.1mm
Maksimum Frekans
20kHz
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Frekans
28Hz
Minimum Çalışma Sıcaklığı
-40°C
Menşe
Taiwan, Province Of China
Ürün Ayrıntıları
Analogue MEMS Microphone - INMP411, InvenSense
The InvenSense INMP411 high SPL microphone presents a low noise, low power bottom port device with an analog output. The MEMS microphone has a linear response up to 131dB SPL it also incorporates an impedance converter and an output amplifier. Featuring high SNR (Signal to Noise Ratio), extended wideband frequency response and it is pin compatible with the IMP401. This omnidirectional (omni) microphone is Ideal in near and far field applications also a range of products like digital video cameras, Bluetooth headsets, tablet computers, fire and safety radios and teleconferencing systems.