ITT Trident Neptune Serisi Konnektör Soket / Jak Yuvası, 19 Kontaklı, Kablo Ucuna Monte, Fiş, IP67
Teknik Belgeler
Özellikler
Marka
ITT CannonKontakların Sayısı
19
Montaj Tipi
Kablo Montajı
Konnektör Boyutu
Standart
Fiş/Priz
Fiş
Kontak Cinsiyeti
Erkek
Sonlandırma Yöntemi
Sıkıştırma
IP Değeri
IP67
Gövde Yönü
Düz
Seri
Neptune Circular
Gerilim Değeri
25.0 V
Kovan Boyutu
16
Muhafaza Malzemesi
Naylon
Kontak Kaplaması
Paslanmaz Çelik
Kontak Malzemesi
Çelik
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+105°C
Ürün Ayrıntıları
Trident Neptune Cable Connectors with Metal Coupling Ring
From ITT Cannon, the Trident connector system is designed for use in harsh environments. With membrane wire seals and a strong metal coupling ring, this connector is ideal for use in outdoor electronics and automobile applications.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
ITT CannonKontakların Sayısı
19
Montaj Tipi
Kablo Montajı
Konnektör Boyutu
Standart
Fiş/Priz
Fiş
Kontak Cinsiyeti
Erkek
Sonlandırma Yöntemi
Sıkıştırma
IP Değeri
IP67
Gövde Yönü
Düz
Seri
Neptune Circular
Gerilim Değeri
25.0 V
Kovan Boyutu
16
Muhafaza Malzemesi
Naylon
Kontak Kaplaması
Paslanmaz Çelik
Kontak Malzemesi
Çelik
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+105°C
Ürün Ayrıntıları
Trident Neptune Cable Connectors with Metal Coupling Ring
From ITT Cannon, the Trident connector system is designed for use in harsh environments. With membrane wire seals and a strong metal coupling ring, this connector is ideal for use in outdoor electronics and automobile applications.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.