Teknik Belgeler
Özellikler
Marka
ITT CannonCinsiyet
Erkek
Tel Boyutu
18 → 16 AWG
Sonlandırma Yöntemi
Sıkıştırma
Seri
T2P
Şununla Birlikte Kullanım İçin
Trident ve APD 6/7 Yönlü Konnektörler
Akım Değeri
13A
Kontak Tipi
Sinyal
Uzunluk
27.69mm
Kontak Kaplaması
Kalay
Gerilim Değeri
30.0 V
Kontak Malzemesi
Bakır Alaşım
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+125°C
Ürün Ayrıntıları
Sinyal Kontakları
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
100
P.O.A.
100
Teknik Belgeler
Özellikler
Marka
ITT CannonCinsiyet
Erkek
Tel Boyutu
18 → 16 AWG
Sonlandırma Yöntemi
Sıkıştırma
Seri
T2P
Şununla Birlikte Kullanım İçin
Trident ve APD 6/7 Yönlü Konnektörler
Akım Değeri
13A
Kontak Tipi
Sinyal
Uzunluk
27.69mm
Kontak Kaplaması
Kalay
Gerilim Değeri
30.0 V
Kontak Malzemesi
Bakır Alaşım
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+125°C
Ürün Ayrıntıları
Sinyal Kontakları
Two-part construction.Contacts may be crimped by a plier type or ratchet style tool.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.