ITT Cannon Circular Connector, 15 Contacts, Panel Mount, Socket, Female, IP67, Trident Neptune Series
Teknik Belgeler
Özellikler
Marka
ITT CannonKontakların Sayısı
15
Montaj Tipi
Panel Montajı
Konnektör Boyutu
Standart
Fiş/Priz
Soket
Kontak Cinsiyeti
Dişi
Sonlandırma Yöntemi
Sıkıştırma
IP Değeri
IP67
Seri
Neptune Circular
Gövde Yönü
Düz
Kontak Kaplaması
Nikel
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+105°C
Kontak Malzemesi
Bakır
Menşe
Hungary
Ürün Ayrıntıları
Panel Plug and Socket Shells, Jam Nut Fixing
Mounted from the rear of a panel via a single "D" hole. May also be used for in-line connections. Includes "O" ring interface seals, rubber cable seals, seal securing nuts and plastic jam nut.Can be used for in-line connections.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
ITT CannonKontakların Sayısı
15
Montaj Tipi
Panel Montajı
Konnektör Boyutu
Standart
Fiş/Priz
Soket
Kontak Cinsiyeti
Dişi
Sonlandırma Yöntemi
Sıkıştırma
IP Değeri
IP67
Seri
Neptune Circular
Gövde Yönü
Düz
Kontak Kaplaması
Nikel
Minimum Çalışma Sıcaklığı
-55°C
Maksimum Çalışma Sıcaklığı
+105°C
Kontak Malzemesi
Bakır
Menşe
Hungary
Ürün Ayrıntıları
Panel Plug and Socket Shells, Jam Nut Fixing
Mounted from the rear of a panel via a single "D" hole. May also be used for in-line connections. Includes "O" ring interface seals, rubber cable seals, seal securing nuts and plastic jam nut.Can be used for in-line connections.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.