ITT Cannon TNA Serisi Şase (Backshell), 14, Düz, Sünmez, Neptün Dairesel Konnektör, TNM Dairesel Konnektör
Teknik Belgeler
Özellikler
Marka
ITT CannonŞununla Birlikte Kullanım İçin
Neptün Dairesel Konnektör, TNM Dairesel Konnektör
Kovan Boyutu
14
Gövde Yönü
Düz
Muhafaza Malzemesi
Polimer
Uzunluk
67.1 mm, 80.5 mm
Sünmez
Yes
Seri
TNA
Menşe
Hungary
Ürün Ayrıntıları
Backshell Accessories
Backshells providing additional protection. Sealed version has integral sealing gland and clamping mechanism. Unsealed version has strain relief clamp.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
ITT CannonŞununla Birlikte Kullanım İçin
Neptün Dairesel Konnektör, TNM Dairesel Konnektör
Kovan Boyutu
14
Gövde Yönü
Düz
Muhafaza Malzemesi
Polimer
Uzunluk
67.1 mm, 80.5 mm
Sünmez
Yes
Seri
TNA
Menşe
Hungary
Ürün Ayrıntıları
Backshell Accessories
Backshells providing additional protection. Sealed version has integral sealing gland and clamping mechanism. Unsealed version has strain relief clamp.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.