Teknik Belgeler
Özellikler
Marka
LappKesit Alanı
1,5 mm²
Mihverlerin Sayısı
3
Kılıf Rengi
Siyah
Uzunluk
50m
Akım Değeri
19 A
CPR Certification
Eca
Dış Çap
12mm
Kılıf Malzemesi
Polivinil Klorür PVC
Gerilim Değeri
1 kV, 600 V
İletken Tel Tipi
Sert
Seri
NYY-J
Çekirdek Telleri
1,38 mm
İletken Malzemesi
Çıplak Bakır
Tellerin Boyutu
1,38 mm
Maksimum Çalışma Sıcaklığı
+50°C
Amerikan Tel Ölçüsü
15 AWG
İletken Direnci
12,1 Ω/km
Yalıtım Malzemesi
PVC
Yangın Davranışı
Alev Geciktirici
Minimum Çalışma Sıcaklığı
-5°C
Karşılanan Standartlar
Euroclass Eca
Ürün Ayrıntıları
Lapp Fixed Installation Power Cable - NYY-J
From Lapp, this NYY-J cable is a widely-used power and control cable that is often found in domestic and commercial electrical wiring. As well as being used in fixed installations, the cable is designed to be used for direct burial, and burial in concrete, providing the operating temperature is adhered to.
The cable is bare copper single core with PVC with a filling compounds over the core assembly. The PVC sheath is flame retardant and robust, allowing the cable to be used in dry, damp and wet interiors. NYY-J cable is also able very resistant to UV, and so is able to be used outdoors.
Features and Benefits
Bare copper conductors
PVC-based outer sheath
Suitable for outdoor use
Flame-retardant according IEC 60332-1-2
Above, below, flush and recess routing
Operating temperature during installation: -5°C to +50°C
Operating temperature in a fixed installation: -40°C to +70°C
Applications
Able to be installed in open air and underground, NYY-J cable presents a versatile power cable that should be used in where the risk of mechanical damage is unlikely. As such it can be used in brickwork and concrete, proving the concrete is not shaken, vibrated or compressed. Lapp NYY-J able is often used in;
Power stations
Distributor boards
Subscriber networks
Power Cable
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
LappKesit Alanı
1,5 mm²
Mihverlerin Sayısı
3
Kılıf Rengi
Siyah
Uzunluk
50m
Akım Değeri
19 A
CPR Certification
Eca
Dış Çap
12mm
Kılıf Malzemesi
Polivinil Klorür PVC
Gerilim Değeri
1 kV, 600 V
İletken Tel Tipi
Sert
Seri
NYY-J
Çekirdek Telleri
1,38 mm
İletken Malzemesi
Çıplak Bakır
Tellerin Boyutu
1,38 mm
Maksimum Çalışma Sıcaklığı
+50°C
Amerikan Tel Ölçüsü
15 AWG
İletken Direnci
12,1 Ω/km
Yalıtım Malzemesi
PVC
Yangın Davranışı
Alev Geciktirici
Minimum Çalışma Sıcaklığı
-5°C
Karşılanan Standartlar
Euroclass Eca
Ürün Ayrıntıları
Lapp Fixed Installation Power Cable - NYY-J
From Lapp, this NYY-J cable is a widely-used power and control cable that is often found in domestic and commercial electrical wiring. As well as being used in fixed installations, the cable is designed to be used for direct burial, and burial in concrete, providing the operating temperature is adhered to.
The cable is bare copper single core with PVC with a filling compounds over the core assembly. The PVC sheath is flame retardant and robust, allowing the cable to be used in dry, damp and wet interiors. NYY-J cable is also able very resistant to UV, and so is able to be used outdoors.
Features and Benefits
Bare copper conductors
PVC-based outer sheath
Suitable for outdoor use
Flame-retardant according IEC 60332-1-2
Above, below, flush and recess routing
Operating temperature during installation: -5°C to +50°C
Operating temperature in a fixed installation: -40°C to +70°C
Applications
Able to be installed in open air and underground, NYY-J cable presents a versatile power cable that should be used in where the risk of mechanical damage is unlikely. As such it can be used in brickwork and concrete, proving the concrete is not shaken, vibrated or compressed. Lapp NYY-J able is often used in;
Power stations
Distributor boards
Subscriber networks