Welding Cable 25mm
Teknik Belgeler
Özellikler
Marka
LappKesit Alanı
25 mm²
Kılıf Rengi
Siyah
Amerikan Tel Ölçüsü
3 AWG
Çekirdek Telleri
760/0,21 mm
Uzunluk
50m
Avrupa Uyumlaştırılmış Kanunu
H01N2-D
Yalıtım Malzemesi
Kauçuk
Gerilim Değeri
100 V
Dış Çap
10.1 x 12.7mm
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Çalışma Sıcaklığı
-25°C
Akım Değeri
173 A
İletken Malzemesi
Bakır
Kablo Tipi
Kaynak Yapma
Karşılanan Standartlar
BS EN 50525
Seri
Arc
Dış Kılıf Malzemesi
Rubber
Tellerin Boyutu
0,21 mm
Tellerin Sayısı
760
Menşe
Germany
Ürün Ayrıntıları
H01N2-D Welding Cable
From Lapp, this harmonised H01N2-D cable is for the transmission of high currents and low voltages, and is typically for use with arc welding machines. This durable and flexible rubber cable is oil resistant, so can be used in demanding environments. It is also UV and cold resistant, and is suitable for some outdoor use, as well as in dry or damp interiors.
This power and control cable has a harmonized bar copper wire, and a synthetic film separator underneath a rubber compound sheath.
Features and Benefits
• HAR-Certified
• Flame-retardant according IEC 60332-1-2
• Oil Resistant
• UV Resistant
• Cold Resistant
• Operating temperature for flexible use: Flexible use: -25°C to +85°C
Application
This Lapp normative arc-welding cable is for transmitting currents from an electric welding device to a welding tool, and must be used only under consideration of EN 50565-2.
Alternatives
• 406-994 is a Welding Cable with a 16 mm Outer Diameter
• 406-984 is a Welding Cable with a 25 mm Outer Diameter
• 406-988 is a Welding Cable with a 35 mm Outer Diameter.
Standards
HD22.6 S2 resp. VDE 0282 part 6
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
LappKesit Alanı
25 mm²
Kılıf Rengi
Siyah
Amerikan Tel Ölçüsü
3 AWG
Çekirdek Telleri
760/0,21 mm
Uzunluk
50m
Avrupa Uyumlaştırılmış Kanunu
H01N2-D
Yalıtım Malzemesi
Kauçuk
Gerilim Değeri
100 V
Dış Çap
10.1 x 12.7mm
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Çalışma Sıcaklığı
-25°C
Akım Değeri
173 A
İletken Malzemesi
Bakır
Kablo Tipi
Kaynak Yapma
Karşılanan Standartlar
BS EN 50525
Seri
Arc
Dış Kılıf Malzemesi
Rubber
Tellerin Boyutu
0,21 mm
Tellerin Sayısı
760
Menşe
Germany
Ürün Ayrıntıları
H01N2-D Welding Cable
From Lapp, this harmonised H01N2-D cable is for the transmission of high currents and low voltages, and is typically for use with arc welding machines. This durable and flexible rubber cable is oil resistant, so can be used in demanding environments. It is also UV and cold resistant, and is suitable for some outdoor use, as well as in dry or damp interiors.
This power and control cable has a harmonized bar copper wire, and a synthetic film separator underneath a rubber compound sheath.
Features and Benefits
• HAR-Certified
• Flame-retardant according IEC 60332-1-2
• Oil Resistant
• UV Resistant
• Cold Resistant
• Operating temperature for flexible use: Flexible use: -25°C to +85°C
Application
This Lapp normative arc-welding cable is for transmitting currents from an electric welding device to a welding tool, and must be used only under consideration of EN 50565-2.
Alternatives
• 406-994 is a Welding Cable with a 16 mm Outer Diameter
• 406-984 is a Welding Cable with a 25 mm Outer Diameter
• 406-988 is a Welding Cable with a 35 mm Outer Diameter.
Standards
HD22.6 S2 resp. VDE 0282 part 6