Legris Nikel Kaplamalı Pirinç Pilot Uyarılı Küresel Vana 1/2 inç G
Teknik Belgeler
Özellikler
Marka
LegrisGiriş Bağlantısı Tipi
Dişli
Ürün Tipi
Bilyalı Valf
Çıkış Bağlantı Tipi
Dişli
Bilya Malzemesi
Nikel Kaplama Pirinç
Çıkış Bağlantı Noktası Boyutu
1/2 in
Gövde Malzemesi
Sand Blasted Nickel Plated Brass
Giriş Bağlantı Noktası Cinsiyeti
Dişi
Çıkış Bağlantı Noktası Cinsiyeti
Dişi
Çıkış Dişi Standardı
G
Maksimum Çalışma Sıcaklığı
80°C
Standartlar/Onaylar
No
Menşe
France
Ürün Ayrıntıları
Double Female with Vent
The standard Legris ball valve provides a reliable means of opening and closing fluid systems. It requires a simple quarter turn of the handle to operate the two-way version
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Stok bilgileri geçici olarak kullanılamıyor.
10.717,44 TL
10.717,44 TL 1 Box of 2 (KDV Hariç)
12.860,93 TL
12.860,93 TL 1 Box of 2 KDV Dahil
1
10.717,44 TL
10.717,44 TL 1 Box of 2 (KDV Hariç)
12.860,93 TL
12.860,93 TL 1 Box of 2 KDV Dahil
Stok bilgileri geçici olarak kullanılamıyor.
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Teknik Belgeler
Özellikler
Marka
LegrisGiriş Bağlantısı Tipi
Dişli
Ürün Tipi
Bilyalı Valf
Çıkış Bağlantı Tipi
Dişli
Bilya Malzemesi
Nikel Kaplama Pirinç
Çıkış Bağlantı Noktası Boyutu
1/2 in
Gövde Malzemesi
Sand Blasted Nickel Plated Brass
Giriş Bağlantı Noktası Cinsiyeti
Dişi
Çıkış Bağlantı Noktası Cinsiyeti
Dişi
Çıkış Dişi Standardı
G
Maksimum Çalışma Sıcaklığı
80°C
Standartlar/Onaylar
No
Menşe
France
Ürün Ayrıntıları
Double Female with Vent
The standard Legris ball valve provides a reliable means of opening and closing fluid systems. It requires a simple quarter turn of the handle to operate the two-way version
Ball Valve, Standard, Padlockable and Panel Mount
These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products