MADE TRIPHASOR Kablo Güzergah İzleyici
Teknik Belgeler
Özellikler
Marka
MADEEkran Tipi
LED
Sayaç Tipi
Kablo İzleyici
Pil Tipi
Ni-Cd
Güç Kaynağı
Batarya, Şebeke
Dahil
Charger, Connection Cable, Crocodile Clip x 4, Current Clamp, MADE Flex Rogowski Coil x 3, One Pack of Replacement Fuses, Probe x 2, Receiver, Transmitter
Maksimum Frekans
60Hz
Maksimum Güvenli Çalışma Gerilimi
230 V ac, 240 V ac
Minimum Frekans
50 Hz
Minimum Güvenli Çalışma Gerilimi
100 V ac, 115 V ac
Model Number p
TRIPHASOR
Menşe
France
Ürün Ayrıntıları
MADE TRIPHASOR Cable Tracer
TRIPHASOR is an instrument for optimising the operation of electrical distribution networks. It measures the electric grid characteristics in real time and enables the identification of each phase on a phased network. TRIPHASOR is used on live low tension networks, under load.
TRIPHASOR consists of a transmitter and a receiver, both can be used on a live LV electric network. The transmitter must be connected in a substation using the voltage LV cords and the current clamp. The receiver allows phase identifying wherever it is connected between phase and neutral, anywhere on the live network.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
MADEEkran Tipi
LED
Sayaç Tipi
Kablo İzleyici
Pil Tipi
Ni-Cd
Güç Kaynağı
Batarya, Şebeke
Dahil
Charger, Connection Cable, Crocodile Clip x 4, Current Clamp, MADE Flex Rogowski Coil x 3, One Pack of Replacement Fuses, Probe x 2, Receiver, Transmitter
Maksimum Frekans
60Hz
Maksimum Güvenli Çalışma Gerilimi
230 V ac, 240 V ac
Minimum Frekans
50 Hz
Minimum Güvenli Çalışma Gerilimi
100 V ac, 115 V ac
Model Number p
TRIPHASOR
Menşe
France
Ürün Ayrıntıları
MADE TRIPHASOR Cable Tracer
TRIPHASOR is an instrument for optimising the operation of electrical distribution networks. It measures the electric grid characteristics in real time and enables the identification of each phase on a phased network. TRIPHASOR is used on live low tension networks, under load.
TRIPHASOR consists of a transmitter and a receiver, both can be used on a live LV electric network. The transmitter must be connected in a substation using the voltage LV cords and the current clamp. The receiver allows phase identifying wherever it is connected between phase and neutral, anywhere on the live network.