Martindale PD240 Gerilim Doğrulama Ünitesi, 2mA, 240V dc
Teknik Belgeler
Özellikler
Marka
MartindaleÜrün Tipi
Proving Unit
Çıkış Gerilimi
240 V
Güç Kaynağı
Pil
Minimum Çalışma Sıcaklığı
-10°C
Maksimum Çalışma Sıcaklığı
40°C
Genişlik
63 mm
Uzunluk
144mm
Yükseklik
31mm
Ağırlık
180g
Standartlar/Onaylar
No
Test Current
2mA
Menşe
Philippines
Ürün Ayrıntıları
Martindale PD240 Pocket Sized Proving Unit
The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.
Supplied with
Battery, belt clip, instruction manual
Standards
BS-EN61010-1 2001
Martindale Lock-Off Kits, Voltage Indicators and Proving Units
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
Calibration type
Üretim Kalibrasyonlu (Sertifikasız)
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
Calibration type
Üretim Kalibrasyonlu (Sertifikasız)
1
Teknik Belgeler
Özellikler
Marka
MartindaleÜrün Tipi
Proving Unit
Çıkış Gerilimi
240 V
Güç Kaynağı
Pil
Minimum Çalışma Sıcaklığı
-10°C
Maksimum Çalışma Sıcaklığı
40°C
Genişlik
63 mm
Uzunluk
144mm
Yükseklik
31mm
Ağırlık
180g
Standartlar/Onaylar
No
Test Current
2mA
Menşe
Philippines
Ürün Ayrıntıları
Martindale PD240 Pocket Sized Proving Unit
The Martindale PD240 is a pocket-sized, battery-powered 240 V DC proving unit which is limited to a current of 2 mA. This makes it suitable for use with digital multimeters and many two pole voltage testers that have an input impedance greater than 120 kΩ. The PD240 is actuated by microswitch when the probes of a voltage indicator or test leads of a multimeter are inserted into the probe apertures on its front face. An LED adjacent to the probe apertures indicates when the unit is powered. The body of the proving device is made out of flame retardant ABS. It is flush mounted so is stable when used on flat surfaces.
Supplied with
Battery, belt clip, instruction manual
Standards
BS-EN61010-1 2001