Teknik Belgeler
Özellikler
Marka
MicrochipBellek Boyutu
8kbit
Arabirim Tipi
Seri
Paket Tipi
SOT-23
Montaj Tipi
Yüzeye Monte
Pim Sayısı
3
Düzen
1k x 8 bit
Minimum Çalışma Besleme Gerilimi
2,5 V
Maksimum Çalışma Besleme Gerilimi
5,5 V
Boyutlar
2.9 x 1.3 x 0.95mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Veri Saklama
200yıl
Ürün Ayrıntıları
11AAxxx/11LCxxx UNI/O™ Serial EEPROM
The Microchip 11AAxxx/11LCxxx family of devices are Serial EEPROMs featuring Microchips proprietary UNI/O™ Serial Bus.
UNI/O™ Serial EEPROM devices require only one connection to a host Microcontroller as clock and data communications are combined into a single serial bit stream. The result is that UNI/O™ devices require one Microcontroller I/O instead of the 2 to 6 (depending on configuration) that I2C, Microwire and SPI bus EEPROM devices require. To the designer this opens up the possibility of employing a smaller host MCU with fewer I/Os, reducing the MCU cost and allowing for a more compact design.
EEPROM Serial Access - Microchip
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
8,299 TL
Each (In a Pack of 10) KDV Hariç
9,959 TL
Each (In a Pack of 10) KDV Dahil
10
8,299 TL
Each (In a Pack of 10) KDV Hariç
9,959 TL
Each (In a Pack of 10) KDV Dahil
10
Teknik Belgeler
Özellikler
Marka
MicrochipBellek Boyutu
8kbit
Arabirim Tipi
Seri
Paket Tipi
SOT-23
Montaj Tipi
Yüzeye Monte
Pim Sayısı
3
Düzen
1k x 8 bit
Minimum Çalışma Besleme Gerilimi
2,5 V
Maksimum Çalışma Besleme Gerilimi
5,5 V
Boyutlar
2.9 x 1.3 x 0.95mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Veri Saklama
200yıl
Ürün Ayrıntıları
11AAxxx/11LCxxx UNI/O™ Serial EEPROM
The Microchip 11AAxxx/11LCxxx family of devices are Serial EEPROMs featuring Microchips proprietary UNI/O™ Serial Bus.
UNI/O™ Serial EEPROM devices require only one connection to a host Microcontroller as clock and data communications are combined into a single serial bit stream. The result is that UNI/O™ devices require one Microcontroller I/O instead of the 2 to 6 (depending on configuration) that I2C, Microwire and SPI bus EEPROM devices require. To the designer this opens up the possibility of employing a smaller host MCU with fewer I/Os, reducing the MCU cost and allowing for a more compact design.