Teknik Belgeler
Özellikler
Marka
MicrochipGüç Yönetimi İşlevi
Flyback Kontrol Cihazı
Kit Sınıflandırması
Geliştirme Panosu
Öne Çıkan Cihaz
MCP19117
Ürün Ayrıntıları
MCP19117 Flyback Demonstration Board
The Microchip MCP19117 Flyback Standalone Evaluation Board is a platform to explore the MCP19117 PWM Controller which combines analogue circuity with a PIC microcontroller core. The board is configured to regulate a load current using a Flyback topology.
Provided is all the needed circuitry to get a working demonstration up and running, with the MCP19117 being pre-programmed with all the required firmware. The Microchip PMBus Monitoring Graphical User Interface (GUI) is used to monitor and configure the MCP19117. Alternatively the MCP19117 can be reprogrammed with user designed firmware through the on-board In-Circuit Serial Programming (ICSP) header.
The featured MCP19117 is a digitally enhanced PWM Controller. The device integrates an 8-bit PIC Microcontroller with a PWM Current Mode Controller to provide a flexible and customisable Buck or Buck/Boost Controller solution. The PWM Controller regulates the output of the DC-DC converter while the MCU dynamically customises the device. Operating parameters, start-up and shut-down profiles, protection levels and fault handling procedures can all be tailored to create a high efficiency Buck or Buck/Boost Converter.
PWM (Pulse Width Modulation) Controllers, Microchip
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
MicrochipGüç Yönetimi İşlevi
Flyback Kontrol Cihazı
Kit Sınıflandırması
Geliştirme Panosu
Öne Çıkan Cihaz
MCP19117
Ürün Ayrıntıları
MCP19117 Flyback Demonstration Board
The Microchip MCP19117 Flyback Standalone Evaluation Board is a platform to explore the MCP19117 PWM Controller which combines analogue circuity with a PIC microcontroller core. The board is configured to regulate a load current using a Flyback topology.
Provided is all the needed circuitry to get a working demonstration up and running, with the MCP19117 being pre-programmed with all the required firmware. The Microchip PMBus Monitoring Graphical User Interface (GUI) is used to monitor and configure the MCP19117. Alternatively the MCP19117 can be reprogrammed with user designed firmware through the on-board In-Circuit Serial Programming (ICSP) header.
The featured MCP19117 is a digitally enhanced PWM Controller. The device integrates an 8-bit PIC Microcontroller with a PWM Current Mode Controller to provide a flexible and customisable Buck or Buck/Boost Controller solution. The PWM Controller regulates the output of the DC-DC converter while the MCU dynamically customises the device. Operating parameters, start-up and shut-down profiles, protection levels and fault handling procedures can all be tailored to create a high efficiency Buck or Buck/Boost Converter.