Microchip HV9861ADB1 Supertex LED Sürücü Geliştirme Board’u, HV9861

RS Stok Numarası: 829-9040Marka: MicrochipÜretici Parça Numarası: HV9861ADB1
brand-logo
View all in LED Geliştirme Araçları

Teknik Belgeler

Özellikler

LED Teknolojisi

LED Sürücü

Kit Sınıflandırması

Değerlendirme Kartı

Öne Çıkan Cihaz

HV9861

Kit Adı

Supertex

Ürün Ayrıntıları

HV9861ADB1 Supertex 350mA 21W AC LED Driver IC Evaluation Board

The HV9861ADB1 is a high-brightness LED driver evaluation board from Supertex Inc. (a subsidiary of Microchip Technology) utilising a patented average-mode, constant-current control scheme. The power conversion stage of the HV9861ADB1 consists of a diode bridge rectifier followed by a buck converter operating with fixed off-time of 20μs. Featured is tight regulation of the LED current to within a few milliamps over the entire range of the input AC line and the output LED string voltage. PWM dimming can be achieved by applying a pulse-width modulated square wave signal between the PWMD and GND pins.

LED Drivers, Microchip

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

P.O.A.

Microchip HV9861ADB1 Supertex LED Sürücü Geliştirme Board’u, HV9861

P.O.A.

Microchip HV9861ADB1 Supertex LED Sürücü Geliştirme Board’u, HV9861
Stok bilgileri geçici olarak kullanılamıyor.

Teknik Belgeler

Özellikler

LED Teknolojisi

LED Sürücü

Kit Sınıflandırması

Değerlendirme Kartı

Öne Çıkan Cihaz

HV9861

Kit Adı

Supertex

Ürün Ayrıntıları

HV9861ADB1 Supertex 350mA 21W AC LED Driver IC Evaluation Board

The HV9861ADB1 is a high-brightness LED driver evaluation board from Supertex Inc. (a subsidiary of Microchip Technology) utilising a patented average-mode, constant-current control scheme. The power conversion stage of the HV9861ADB1 consists of a diode bridge rectifier followed by a buck converter operating with fixed off-time of 20μs. Featured is tight regulation of the LED current to within a few milliamps over the entire range of the input AC line and the output LED string voltage. PWM dimming can be achieved by applying a pulse-width modulated square wave signal between the PWMD and GND pins.

LED Drivers, Microchip