Teknik Belgeler
Özellikler
Marka
MicrochipMaksimum Anahtarlama Frekansı
1,6 MHz
Çıkış Gerilimi
0,5 → 3,6 V
Çıkış Akımı
30 mA
Kontrol Yöntemi
Gerilim
Montaj Tipi
Yüzeye Monte
Düşme Süresi
30ns
Paket Tipi
QFN
Yükselme Süresi
30ns
Pim Sayısı
28
Topoloji
Buck
Maksimum Görev Döngüsü
<50%
Boyutlar
5 x 5 x 0.95mm
Uzunluk
5mm
Genişlik
5mm
Yükseklik
0.95mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+125°C
Ürün Ayrıntıları
MCP19118/19119 PWM Controllers with 8-Bit PIC MCU
MCP19118/19119 devices from Microchip are highly integrated, mixed signal, analogue pulse-width modulation (PWM) current mode controllers with an integrated PIC® microcontroller core for synchronous DC/DC step-down applications.
The integrated PIC® microcontroller mid-range core allows complete customisation of the device operating parameters, start-up and shutdown profiles, protection levels and fault handling procedures. After initial configuration using Microchips MPLAB® X Integrated Development Environment (IDE) software, the PMBus or I2C can be used by a host PC to communicate with or modify the operation of the device.
PWM (Pulse Width Modulation) Controllers, Microchip
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
2
P.O.A.
2
Teknik Belgeler
Özellikler
Marka
MicrochipMaksimum Anahtarlama Frekansı
1,6 MHz
Çıkış Gerilimi
0,5 → 3,6 V
Çıkış Akımı
30 mA
Kontrol Yöntemi
Gerilim
Montaj Tipi
Yüzeye Monte
Düşme Süresi
30ns
Paket Tipi
QFN
Yükselme Süresi
30ns
Pim Sayısı
28
Topoloji
Buck
Maksimum Görev Döngüsü
<50%
Boyutlar
5 x 5 x 0.95mm
Uzunluk
5mm
Genişlik
5mm
Yükseklik
0.95mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+125°C
Ürün Ayrıntıları
MCP19118/19119 PWM Controllers with 8-Bit PIC MCU
MCP19118/19119 devices from Microchip are highly integrated, mixed signal, analogue pulse-width modulation (PWM) current mode controllers with an integrated PIC® microcontroller core for synchronous DC/DC step-down applications.
The integrated PIC® microcontroller mid-range core allows complete customisation of the device operating parameters, start-up and shutdown profiles, protection levels and fault handling procedures. After initial configuration using Microchips MPLAB® X Integrated Development Environment (IDE) software, the PMBus or I2C can be used by a host PC to communicate with or modify the operation of the device.