Teknik Belgeler
Özellikler
Marka
MicrochipDesteklenen Protokol
802.11b, 802.11g, 802.11n
Desteklenen Güvenlik Standartları
WPS
Desteklenen Veriyolu Arabirimleri
UART
Besleme Gerilimi
3.15 → 3.45V
Boyutlar
17.8 x 26.7 x 2.2mm
Yükseklik
2.2mm
Uzunluk
26.7mm
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Çalışma Sıcaklığı
-40°C
Genişlik
17.8mm
Ürün Ayrıntıları
RN1810/RN1810E 802.11b/g/n WiFi Module
The Microchip RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary components into a surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier.
The RN1810 can help shorten development time. The integrated design provides a certified solution to remove the need for RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections.
Two variants are available; the RN1810 with an integral PCB Trace Antenna and the RN1810E with a W.FL Connector for an External Antenna.
WLAN (Wireless Local Area Network) - Microchip Technology
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
458,21 TL
Each KDV Hariç
549,85 TL
Each KDV Dahil
1
458,21 TL
Each KDV Hariç
549,85 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
MicrochipDesteklenen Protokol
802.11b, 802.11g, 802.11n
Desteklenen Güvenlik Standartları
WPS
Desteklenen Veriyolu Arabirimleri
UART
Besleme Gerilimi
3.15 → 3.45V
Boyutlar
17.8 x 26.7 x 2.2mm
Yükseklik
2.2mm
Uzunluk
26.7mm
Maksimum Çalışma Sıcaklığı
+85°C
Minimum Çalışma Sıcaklığı
-40°C
Genişlik
17.8mm
Ürün Ayrıntıları
RN1810/RN1810E 802.11b/g/n WiFi Module
The Microchip RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary components into a surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier.
The RN1810 can help shorten development time. The integrated design provides a certified solution to remove the need for RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections.
Two variants are available; the RN1810 with an integral PCB Trace Antenna and the RN1810E with a W.FL Connector for an External Antenna.