MikroElektronika MIKROE-1901 Button R mikroBus Takılabilir Kart İnsan Makine Arayüzü Geliştirme Kiti

RS Stok Numarası: 136-0738Marka: MikroElektronikaÜretici Parça Numarası: MIKROE-1901
brand-logo
View all in HMI Geliştirme Araçları

Teknik Belgeler

Özellikler

Kit Sınıflandırması

mikroBus Takılabilir Kart

Kit Adı

Button R

Ürün Ayrıntıları

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

390,66 TL

Each KDV Hariç

468,79 TL

Each KDV Dahil

MikroElektronika MIKROE-1901 Button R mikroBus Takılabilir Kart İnsan Makine Arayüzü Geliştirme Kiti

390,66 TL

Each KDV Hariç

468,79 TL

Each KDV Dahil

MikroElektronika MIKROE-1901 Button R mikroBus Takılabilir Kart İnsan Makine Arayüzü Geliştirme Kiti
Stok bilgileri geçici olarak kullanılamıyor.

Teknik Belgeler

Özellikler

Kit Sınıflandırması

mikroBus Takılabilir Kart

Kit Adı

Button R

Ürün Ayrıntıları

Button G Click & Button R Click mikroBUS™

Click accessory modules for use with MikroElektronika mikroBUS™ microcontroller development boards. The Button click boards are the simplest solutions for adding single push buttons to your design. The push buttons are transparent, 6.8mm in diameter and are illuminated by either a green or red LEDs. Operating a switch sends an interrupt signal to the target board microcontroller. The illuminating LED is controlled separately through the mikroBUS PWM pin allowing programming of light intensity or flashing operation. The boards require a power supply of either 3.3 or 5V.

136-0780 MIKROE-2040 Button G Click with Green LED
136-0738 MIKROE-1901 Button R Click with Red LED

Click mikroBUS™ Human-Machine Interface Boards