MikroElektronika MPXV5010DP mikroBus Takılabilir Kart Diff Pressure Click MIKROE-2387 Sensör Geliştirme Kiti

RS Stok Numarası: 136-0841Marka: MikroElektronikaÜretici Parça Numarası: MIKROE-2387
brand-logo

Teknik Belgeler

Özellikler

Sensör Teknolojisi

Diferansiyel Basınç Sensörü

Öne Çıkan Cihaz

MPXV5010DP

Kit Sınıflandırması

mikroBus Takılabilir Kart

Kit Adı

Diff Pressure Click

Ürün Ayrıntıları

Diff pressure click mikroBUS™

A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The Diff pressure click module has an NXP MPXV5010DP integrated silicon pressure transducer with two axial ports for differential pressure measurements. The device includes signal conditioning and temperature compensation and is factory calibrated. The analogue output from the sensor is processed by an ADC on the click board to provide a digital output for the mikroBUS SPI interface. The click board communicates with the target microcontroller via SPI interface and requires a 3.3 or 5V power supply.

Click mikroBUS™ Gas and Pressure Sensor Boards

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

2.124,89 TL

Each KDV Hariç

2.549,87 TL

Each KDV Dahil

MikroElektronika MPXV5010DP mikroBus Takılabilir Kart Diff Pressure Click MIKROE-2387 Sensör Geliştirme Kiti

2.124,89 TL

Each KDV Hariç

2.549,87 TL

Each KDV Dahil

MikroElektronika MPXV5010DP mikroBus Takılabilir Kart Diff Pressure Click MIKROE-2387 Sensör Geliştirme Kiti
Stok bilgileri geçici olarak kullanılamıyor.

Teknik Belgeler

Özellikler

Sensör Teknolojisi

Diferansiyel Basınç Sensörü

Öne Çıkan Cihaz

MPXV5010DP

Kit Sınıflandırması

mikroBus Takılabilir Kart

Kit Adı

Diff Pressure Click

Ürün Ayrıntıları

Diff pressure click mikroBUS™

A Click accessory module for use with MikroElektronika mikroBUS™ microcontroller development boards. The Diff pressure click module has an NXP MPXV5010DP integrated silicon pressure transducer with two axial ports for differential pressure measurements. The device includes signal conditioning and temperature compensation and is factory calibrated. The analogue output from the sensor is processed by an ADC on the click board to provide a digital output for the mikroBUS SPI interface. The click board communicates with the target microcontroller via SPI interface and requires a 3.3 or 5V power supply.

Click mikroBUS™ Gas and Pressure Sensor Boards