Teknik Belgeler
Özellikler
Marka
MikroElektronikaSensör Teknolojisi
Kalp Atış Hızı Sensörü
Öne Çıkan Cihaz
ADS1194
Kit Sınıflandırması
mikroBus Takılabilir Kart
Kit Adı
ECG 2 click
Ürün Ayrıntıları
ECG 2 click mikroBUS™
The MikroElektronika ECG 2 Click Board is an accessory board that provides a simple method of adding electrocardiogram measurement hardware to a development platform.
Like all Click Boards the ECG Click 2 fits the popular mikroBUS™ socket, creating a plug-in solution to add functionality, removing the need for hardware configuration.
The ECG Click 2 measures electrical activity of the heart through electrodes taped to the skin. For 3 wire measurement the electrodes connect to the board via a 3.5 mm jack. For 4 wire measurement, screw terminals are provided.
The circuity of the ECG click is based around the TI ADS1194, a 16-bit Analogue Front End optimised for biopotential measurement. The board circuitry amplifies the electrical signals from the heart, filters out noise and converts the signal into digital. This data is then communicated to the mother development board via SPI.
The MikroElektronika MikroPlot software, a free to download data visualisation tool, can be used to analyse the data generated and create an ECG plot.
Click mikroBUS™ Biomedical Boards
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
1.912,60 TL
Each KDV Hariç
2.295,12 TL
Each KDV Dahil
1
1.912,60 TL
Each KDV Hariç
2.295,12 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
MikroElektronikaSensör Teknolojisi
Kalp Atış Hızı Sensörü
Öne Çıkan Cihaz
ADS1194
Kit Sınıflandırması
mikroBus Takılabilir Kart
Kit Adı
ECG 2 click
Ürün Ayrıntıları
ECG 2 click mikroBUS™
The MikroElektronika ECG 2 Click Board is an accessory board that provides a simple method of adding electrocardiogram measurement hardware to a development platform.
Like all Click Boards the ECG Click 2 fits the popular mikroBUS™ socket, creating a plug-in solution to add functionality, removing the need for hardware configuration.
The ECG Click 2 measures electrical activity of the heart through electrodes taped to the skin. For 3 wire measurement the electrodes connect to the board via a 3.5 mm jack. For 4 wire measurement, screw terminals are provided.
The circuity of the ECG click is based around the TI ADS1194, a 16-bit Analogue Front End optimised for biopotential measurement. The board circuitry amplifies the electrical signals from the heart, filters out noise and converts the signal into digital. This data is then communicated to the mother development board via SPI.
The MikroElektronika MikroPlot software, a free to download data visualisation tool, can be used to analyse the data generated and create an ECG plot.