Flaşör, Xenon, Kehribar, Yanıp Sönen, Duvara Monte, 100 → 240 V ac
Teknik Belgeler
Özellikler
Marka
MoflashBesleme Gerilimi
100 → 240 V ac
Işık Etkisi
Yanıp Sönen
Mercek Rengi
Kehribar
Montaj Stili
Wall Mount
Ampul Tipi
Zenon
Akım Tipi
AC
Muhafaza Rengi
Siyah
Lamba Dahil
Yes
Seri
X 450
Yükseklik
68mm
Taban Uzunluğu
105mm
Taban Genişliği
105mm
Maksimum Sıcaklık
+70°C
Menşe
France
Ürün Ayrıntıları
Industrial & Marine Xenon Beacon, X450 Series
The X450 Xenon beacon is suitable for Industrial & Marine signalling applications where a visual signal is required to operate in very harsh environmental conditions.
The beacons have a flashing mode light effect (single stage alarm). Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and the discharging a large current through the xenon gas in the tube.
This warning beacon has multiple flash rate settings, that can be set at installation, that range from 60 flashes per minute up to 180 flashes per minute to create a more noticeable warning signal to the human eye. The design of this beacon allows for termination in the base.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
MoflashBesleme Gerilimi
100 → 240 V ac
Işık Etkisi
Yanıp Sönen
Mercek Rengi
Kehribar
Montaj Stili
Wall Mount
Ampul Tipi
Zenon
Akım Tipi
AC
Muhafaza Rengi
Siyah
Lamba Dahil
Yes
Seri
X 450
Yükseklik
68mm
Taban Uzunluğu
105mm
Taban Genişliği
105mm
Maksimum Sıcaklık
+70°C
Menşe
France
Ürün Ayrıntıları
Industrial & Marine Xenon Beacon, X450 Series
The X450 Xenon beacon is suitable for Industrial & Marine signalling applications where a visual signal is required to operate in very harsh environmental conditions.
The beacons have a flashing mode light effect (single stage alarm). Xenon beacons (sometimes called strobes) are controlled via a PCB and put out a very brief but bright flash of white light by ionizing and the discharging a large current through the xenon gas in the tube.
This warning beacon has multiple flash rate settings, that can be set at installation, that range from 60 flashes per minute up to 180 flashes per minute to create a more noticeable warning signal to the human eye. The design of this beacon allows for termination in the base.