Teknik Belgeler
Özellikler
Marka
MolexKontakların Sayısı
9
Kontak Malzemesi
Fosfor Bronz
Hatve
1mm
Montaj Tipi
Yüzeye Monte
Cinsiyet
Erkek
Sonlandırma Tipi
ZIF Alt Kontak
Gövde Yönü
Dik Açı
Akım Değeri
500mA
Gerilim Değeri
50 V ac/dc
Seri
Easy-On
Seri Numarası
200528
Sıraların Sayısı
1
Kontak Kaplaması
Nikel üstüne Altın
Sonlandırma Yöntemi
Lehim
Maksimum Çalışma Sıcaklığı
+105°C
Muhafaza Malzemesi
Sıvı Kristal Polimer
Minimum Çalışma Sıcaklığı
-40°C
Menşe
Japan
Ürün Ayrıntıları
Molex Easy-On 1.0mm FFC/FPC Connectors with Double-Bottom Contacts, 200528 Series
Easy-On 1.0 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 1.0 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 1.0 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 1.0 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 1.0 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.
1.0mm FFC/FPC Connectors – Molex
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
13,201 TL
Each (On a Reel of 3000) KDV Hariç
15,841 TL
Each (On a Reel of 3000) KDV Dahil
3000
13,201 TL
Each (On a Reel of 3000) KDV Hariç
15,841 TL
Each (On a Reel of 3000) KDV Dahil
3000
Teknik Belgeler
Özellikler
Marka
MolexKontakların Sayısı
9
Kontak Malzemesi
Fosfor Bronz
Hatve
1mm
Montaj Tipi
Yüzeye Monte
Cinsiyet
Erkek
Sonlandırma Tipi
ZIF Alt Kontak
Gövde Yönü
Dik Açı
Akım Değeri
500mA
Gerilim Değeri
50 V ac/dc
Seri
Easy-On
Seri Numarası
200528
Sıraların Sayısı
1
Kontak Kaplaması
Nikel üstüne Altın
Sonlandırma Yöntemi
Lehim
Maksimum Çalışma Sıcaklığı
+105°C
Muhafaza Malzemesi
Sıvı Kristal Polimer
Minimum Çalışma Sıcaklığı
-40°C
Menşe
Japan
Ürün Ayrıntıları
Molex Easy-On 1.0mm FFC/FPC Connectors with Double-Bottom Contacts, 200528 Series
Easy-On 1.0 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 1.0 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 1.0 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 1.0 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 1.0 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.