Teknik Belgeler
Özellikler
Marka
MolexKontakların Sayısı
17
Kontak Malzemesi
Fosfor Bronz
Hatve
1mm
Montaj Tipi
Yüzeye Monte
Cinsiyet
Erkek
Sonlandırma Tipi
ZIF Alt Kontak
Gövde Yönü
Dik Açı
Akım Değeri
500mA
Gerilim Değeri
50 V ac/dc
Seri
Easy-On
Seri Numarası
200528
Sıraların Sayısı
1
Sonlandırma Yöntemi
Lehim
Kontak Kaplaması
Nikel üstüne Altın
Muhafaza Malzemesi
Sıvı Kristal Polimer
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+105°C
Menşe
Japan
Ürün Ayrıntıları
Molex Easy-On 1.0mm FFC/FPC Connectors with Double-Bottom Contacts, 200528 Series
Easy-On 1.0 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 1.0 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 1.0 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 1.0 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 1.0 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.
1.0mm FFC/FPC Connectors – Molex
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
15,179 TL
Each (On a Reel of 3000) KDV Hariç
18,215 TL
Each (On a Reel of 3000) KDV Dahil
3000
15,179 TL
Each (On a Reel of 3000) KDV Hariç
18,215 TL
Each (On a Reel of 3000) KDV Dahil
3000
Teknik Belgeler
Özellikler
Marka
MolexKontakların Sayısı
17
Kontak Malzemesi
Fosfor Bronz
Hatve
1mm
Montaj Tipi
Yüzeye Monte
Cinsiyet
Erkek
Sonlandırma Tipi
ZIF Alt Kontak
Gövde Yönü
Dik Açı
Akım Değeri
500mA
Gerilim Değeri
50 V ac/dc
Seri
Easy-On
Seri Numarası
200528
Sıraların Sayısı
1
Sonlandırma Yöntemi
Lehim
Kontak Kaplaması
Nikel üstüne Altın
Muhafaza Malzemesi
Sıvı Kristal Polimer
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+105°C
Menşe
Japan
Ürün Ayrıntıları
Molex Easy-On 1.0mm FFC/FPC Connectors with Double-Bottom Contacts, 200528 Series
Easy-On 1.0 mm FFC/FPC connectors with double-bottom contacts and a compact, low profile design with a mating height of just 1.90 mm. The contact design of these Easy-On 1.0 mm FFC/FPC connectors features 2 lower contacts per circuit. This double bottom contact terminal design removes dust and contaminants resulting in a clean mating interface and high contact reliability. This design also provides double the contacts per circuit. The actuators of these Easy-On 1.0 mm FFC/FPC connectors are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. The housings of these FFC/FPC connectors feature a cable ear-tab locking feature with indents in them in which accept the FPC tabs. This feature provides proper cable seating and alignment, high retention force and easy actuation. These Easy-On 1.0 mm FFC/FPC connectors also have Zero insertion force for easy cable insertion and for allowing repeat cycling with minimum wear. The top of the housings also feature a vacuum pick and place area for easy board assembly and cost savings. Robust solder tabs on these SMT FFC/FPC connectors offer secure PCB retention and strain relief for solder joints. These Easy-On 1.0 mm FFC/FPC connectors are available in a wide range of circuit sizes for design flexibility.