İzolesiz DC-DC Dönüştürücüsü
Teknik Belgeler
Özellikler
Marka
MurataÇıkış Gerilimi
5V dc
Giriş Gerilimi Aralığı
8 → 14 V dc
Güç Değeri
30W
Giriş Gerilimi Nominal Değeri
12 V dc
Çıkış Akımı
6A
Montaj Tipi
Yüzeye Monte
Yalıtımlı
No
Çıkışların Sayısı
1
Paket
SMD
Genişlik
7.5mm
Uzunluk
9mm
Seri
MGK
Yük Düzenleme
1%
Minimum Sıcaklık
-40°C
Verimlilik
95%
Maksimum Sıcaklık
+85°C
Karşılanan Standartlar
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
PRICED TO CLEAR
Yes
Ürün Ayrıntıları
Murata Mono Block 6A DC-DC Converter
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input voltage ranges of 4.5 to 5.5 V dc（*FRSR) or 8.0 to 14 V dc（*ERSR) and a maximum output current of 6 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high power conversion efficient PoL module features programmable output voltage 0.7to1.8 V dc（*FRSR) or 0.7 to 5.0 V dc（*ERSR), On/Off control and Power Good signal output. These converters also include under voltage lock out (UVLO), output short circuit protection and over-current protection.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Teknik Belgeler
Özellikler
Marka
MurataÇıkış Gerilimi
5V dc
Giriş Gerilimi Aralığı
8 → 14 V dc
Güç Değeri
30W
Giriş Gerilimi Nominal Değeri
12 V dc
Çıkış Akımı
6A
Montaj Tipi
Yüzeye Monte
Yalıtımlı
No
Çıkışların Sayısı
1
Paket
SMD
Genişlik
7.5mm
Uzunluk
9mm
Seri
MGK
Yük Düzenleme
1%
Minimum Sıcaklık
-40°C
Verimlilik
95%
Maksimum Sıcaklık
+85°C
Karşılanan Standartlar
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
PRICED TO CLEAR
Yes
Ürün Ayrıntıları
Murata Mono Block 6A DC-DC Converter
The MYMGK***06 series are miniature Mono Block type non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measures only 9.0 x 7.5 x 5.0 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems. The converters have input voltage ranges of 4.5 to 5.5 V dc（*FRSR) or 8.0 to 14 V dc（*ERSR) and a maximum output current of 6 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high power conversion efficient PoL module features programmable output voltage 0.7to1.8 V dc（*FRSR) or 0.7 to 5.0 V dc（*ERSR), On/Off control and Power Good signal output. These converters also include under voltage lock out (UVLO), output short circuit protection and over-current protection.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products