İzolesiz DC-DC Dönüştürücüsü / 1,8V dc, 20A
Teknik Belgeler
Özellikler
Marka
MurataÇıkış Gerilimi
1.8V dc
Giriş Gerilimi Aralığı
4,5 → 5,5 V dc
Güç Değeri
36W
Giriş Gerilimi Nominal Değeri
5 V dc
Çıkış Akımı
20A
Montaj Tipi
Yüzeye Monte
Çıkışların Sayısı
1
Genişlik
9mm
Derinlik
5.6mm
Uzunluk
10.5mm
Seri
MGK
Yük Düzenleme
±1%
Minimum Sıcaklık
-40°C
Verimlilik
89.2%
Maksimum Sıcaklık
+85°C
Karşılanan Standartlar
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
Ürün Ayrıntıları
Murata Mono Block 20A DC-DC Converter
The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
Standart
1
Teklif İsteyiniz
Standart
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Teknik Belgeler
Özellikler
Marka
MurataÇıkış Gerilimi
1.8V dc
Giriş Gerilimi Aralığı
4,5 → 5,5 V dc
Güç Değeri
36W
Giriş Gerilimi Nominal Değeri
5 V dc
Çıkış Akımı
20A
Montaj Tipi
Yüzeye Monte
Çıkışların Sayısı
1
Genişlik
9mm
Derinlik
5.6mm
Uzunluk
10.5mm
Seri
MGK
Yük Düzenleme
±1%
Minimum Sıcaklık
-40°C
Verimlilik
89.2%
Maksimum Sıcaklık
+85°C
Karşılanan Standartlar
CSA-C22.2 No. 60950-1, EN 60950, IEC, IEC/EN 60950-1, UL, UL 60950-1
Ürün Ayrıntıları
Murata Mono Block 20A DC-DC Converter
The MYMGK1R820 series from Murata are miniature Mono Block type Non-isolated Point-of-Load (PoL) DC-DC power converters for embedded applications. The tiny form factor measure only 10.5 x 9.0 x 5.6 mm. Applications include powering FPGA/CPU’s, Datacom/telecom systems, Distributed Bus Architectures (DBA), programmable logic and mixed voltage systems.
The converters have input voltage ranges of 4.5 V dc to 5.5 V dc (*FRSR) or 8.0 V dc to 14 V dc (*ERSR) and a maximum output current of 20 Amps. Based on a fixed frequency synchronous buck converter switching topology, this high-power conversion efficient PoL module features programmable output voltage 0.7 V to 1.8 V, On/Off control and Power Good signal output. These converters also include under voltage lock out UVLO), output short circuit protection and overcurrent protection.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products