24V dc EMPARRO EMPARRO DIN Ray Güç Kaynağı, 24V dc / 28V dc, 10A 1 Çıkışlı 240W, Anahtarlama Modu

RS Stok Numarası: 123-6696Marka: Murrelektronik LimitedÜretici Parça Numarası: 85441
brand-logo

Teknik Belgeler

Özellikler

Seri

EMPARRO

Tip

Anahtarlama Modu

Elektrik Fazı

1

Çıkışların Sayısı

1

Giriş Gerilimi

230V ac

AC veya DC Çıkış Gerilimi

dc

Çıkış Gerilimi

24V dc

Çıkış Akımı

10A

Güç Değeri

240W

Boyutlar

123 x 65 x 138mm

Genişlik

65mm

Derinlik

138mm

Yükseklik

123mm

Montaj Tipi

DIN Rayına Monte

Minimum Sıcaklık

-25°C

Dalgacık Ve Gürültü

50mV ac

MTBF

>500000sa

Çıkış Gerilimi Ayar Aralığı

24 → 28V

Diğer Özellikler

Verimli, Güvenilir, Sağlam

Maksimum Sıcaklık

+60°C

Karşılanan Standartlar

cULus, cULus Recognised, DNC, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, GL, SEMI F47

Menşe

Czech Republic

Ürün Ayrıntıları

Emparro Power Supply 1 and 3 Phase

Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.

Switch Mode - Murrelektronik

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

Teklif İsteyiniz

24V dc EMPARRO EMPARRO DIN Ray Güç Kaynağı, 24V dc / 28V dc, 10A 1 Çıkışlı 240W, Anahtarlama Modu

Teklif İsteyiniz

24V dc EMPARRO EMPARRO DIN Ray Güç Kaynağı, 24V dc / 28V dc, 10A 1 Çıkışlı 240W, Anahtarlama Modu
Stok bilgileri geçici olarak kullanılamıyor.

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more

Teknik Belgeler

Özellikler

Seri

EMPARRO

Tip

Anahtarlama Modu

Elektrik Fazı

1

Çıkışların Sayısı

1

Giriş Gerilimi

230V ac

AC veya DC Çıkış Gerilimi

dc

Çıkış Gerilimi

24V dc

Çıkış Akımı

10A

Güç Değeri

240W

Boyutlar

123 x 65 x 138mm

Genişlik

65mm

Derinlik

138mm

Yükseklik

123mm

Montaj Tipi

DIN Rayına Monte

Minimum Sıcaklık

-25°C

Dalgacık Ve Gürültü

50mV ac

MTBF

>500000sa

Çıkış Gerilimi Ayar Aralığı

24 → 28V

Diğer Özellikler

Verimli, Güvenilir, Sağlam

Maksimum Sıcaklık

+60°C

Karşılanan Standartlar

cULus, cULus Recognised, DNC, EN 55011 B, EN 60715, EN 60950-1, EN 61000-3-2, EN 61204-3, GL, SEMI F47

Menşe

Czech Republic

Ürün Ayrıntıları

Emparro Power Supply 1 and 3 Phase

Murrelektroniks Emparro SMPS units have an efficiency rate of up to 95% keeping power loss and energy consumption to a minimum saving you money.
A higher efficiency rating results in minimum power loss, which equates to reduced operating costs. Emparros lower operating temperature reduces heat build-up in the cabinet ensuring that the device, and the components installed around it are not affected. Therefore, control cabinets with smaller dimensions can be used.
The device supplies up to 50% more power to start up higher loads and capacities without using another power supply.
The output voltage is controlled with a constant current when there is an overload. It is limited to 100% of the nominal current (or to 150% in Power boost mode). The power supply is then protected from damage.

Switch Mode - Murrelektronik

Ideate. Create. Collaborate

JOIN FOR FREE

No hidden fees!

design-spark
design-spark
  • Download and use our DesignSpark software for your PCB and 3D Mechanical designs
  • View and contribute website content and forums
  • Download 3D Models, Schematics and Footprints from more than a million products
Click here to find out more