250 W Diffused Elliptical SON-E Lamp, GES/E40, 2000K, 90mm
Teknik Belgeler
Özellikler
Marka
OsramVat Miktarı
250 W
Lamba Tabanı
GES/E40
Lamba Şekli
Eliptik
SON Tipi
SON-E
Lamba Kaplaması
Yayınık
Uzunluk
226 mm
Çap
90mm
Aydınlatma Gücü
31100 lm
Işıksal Verim
124lm/W
Renk İşleme
25
Renk Sıcaklığı
2000K
Seri
VIALOX
Ürün Ayrıntıları
Vialox® NAV®-E SUPER 4Y®
Elliptical diffuse high pressure sodium lamps.
Discharge SON Lamps
These lamps combine high efficiency and long life with an improvement in colour appearance and rendering compared with low pressure lamps. SON lamps emit a golden-white light. The SON-T lamp, with its clear tubular outer envelope, lends itself to applications that demand precise optical control, e.g. floodlighting. The SON-E lamp, with its elliptical glass bulb, inside which a white diffusing coating is applied, suits other applications where such accuracy of light control is not so essential. An ignitor (internal or external) is used to supply the high voltage necessary for lamp strike up. Reliable strike up (when hot, less than 60 seconds) thus is ensured, and a simple choke is used to stop excessive voltage rise. The run-up time can be up to 6 minutes when cold.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Teknik Belgeler
Özellikler
Marka
OsramVat Miktarı
250 W
Lamba Tabanı
GES/E40
Lamba Şekli
Eliptik
SON Tipi
SON-E
Lamba Kaplaması
Yayınık
Uzunluk
226 mm
Çap
90mm
Aydınlatma Gücü
31100 lm
Işıksal Verim
124lm/W
Renk İşleme
25
Renk Sıcaklığı
2000K
Seri
VIALOX
Ürün Ayrıntıları
Vialox® NAV®-E SUPER 4Y®
Elliptical diffuse high pressure sodium lamps.
Discharge SON Lamps
These lamps combine high efficiency and long life with an improvement in colour appearance and rendering compared with low pressure lamps. SON lamps emit a golden-white light. The SON-T lamp, with its clear tubular outer envelope, lends itself to applications that demand precise optical control, e.g. floodlighting. The SON-E lamp, with its elliptical glass bulb, inside which a white diffusing coating is applied, suits other applications where such accuracy of light control is not so essential. An ignitor (internal or external) is used to supply the high voltage necessary for lamp strike up. Reliable strike up (when hot, less than 60 seconds) thus is ensured, and a simple choke is used to stop excessive voltage rise. The run-up time can be up to 6 minutes when cold.