Osram OT 45/220-240/700 LTCS, Akım Sınırlamalı LED Sürücü (LED Driver) 45W, 38 → 120V, OPTOTRONIC OT Serisi
Teknik Belgeler
Özellikler
Marka
OsramÇıkış Gerilimi
38 → 120V
Maksimum Çıkış Gücü
45W
Çıkış Akımı
100 mA, 700 mA
Giriş Gerilimi
195 → 264 V
Çalışma
Sabit Akım
AC veya DC Giriş Gerilimi
ac
IP Değeri
IP20
Seri
OPTOTRONIC OT
Gerilim Değeri
195 → 264V
Ürün Ayrıntıları
OPTOTRONIC 700mA Constant Current LED Drivers with LEDset Interface
These constant current OPTOTRONIC LED drivers from Osram, are fully variable between 100 and 700mA to drive any LED module or OLED panel (such as stock no. 727-2413), by simple potential divider network or potentiometer. Alternatively, for Osram LEDset LED modules, a simple cable between the driver and the LED module will automatically set the correct drive current. The LEDset input terminal on the OPTOTRONIC LED driver can also be used to utilise feedback from thermal or ambient light sensors to vary the drive current and therefore the light output of the modules automatically.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
P.O.A.
1
P.O.A.
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Teknik Belgeler
Özellikler
Marka
OsramÇıkış Gerilimi
38 → 120V
Maksimum Çıkış Gücü
45W
Çıkış Akımı
100 mA, 700 mA
Giriş Gerilimi
195 → 264 V
Çalışma
Sabit Akım
AC veya DC Giriş Gerilimi
ac
IP Değeri
IP20
Seri
OPTOTRONIC OT
Gerilim Değeri
195 → 264V
Ürün Ayrıntıları
OPTOTRONIC 700mA Constant Current LED Drivers with LEDset Interface
These constant current OPTOTRONIC LED drivers from Osram, are fully variable between 100 and 700mA to drive any LED module or OLED panel (such as stock no. 727-2413), by simple potential divider network or potentiometer. Alternatively, for Osram LEDset LED modules, a simple cable between the driver and the LED module will automatically set the correct drive current. The LEDset input terminal on the OPTOTRONIC LED driver can also be used to utilise feedback from thermal or ambient light sensors to vary the drive current and therefore the light output of the modules automatically.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products