Parker Hidrolik Dişli Pompası, 8cm³
Teknik Belgeler
Özellikler
Marka
ParkerHacim
8cm³
Ürün Tipi
Hydraulic Gear Pump
Continuous Operating Pressure
250bar
Seri
PGP511
Dönüş Yönü
Saat Yönüne
Maksimum Dönme Hızı
2500rpm
Giriş Diş Standardı
NPTF
Intermittent Pressure
260bar
Çıkış Dişi Standardı
NPTF
Genişlik
89.5 mm
Uzunluk
130.7mm
Yükseklik
114mm
Ağırlık
4kg
Standartlar/Onaylar
No
Menşe
Czech Republic
Ürün Ayrıntıları
Fixed Displacement Gear Pump, 1:8 Tapered Shaft
Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide.
Gear Pumps
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Teknik Belgeler
Özellikler
Marka
ParkerHacim
8cm³
Ürün Tipi
Hydraulic Gear Pump
Continuous Operating Pressure
250bar
Seri
PGP511
Dönüş Yönü
Saat Yönüne
Maksimum Dönme Hızı
2500rpm
Giriş Diş Standardı
NPTF
Intermittent Pressure
260bar
Çıkış Dişi Standardı
NPTF
Genişlik
89.5 mm
Uzunluk
130.7mm
Yükseklik
114mm
Ağırlık
4kg
Standartlar/Onaylar
No
Menşe
Czech Republic
Ürün Ayrıntıları
Fixed Displacement Gear Pump, 1:8 Tapered Shaft
Parker PGP/PGM 500 series gear pumps are an advanced performance version of the international “bushing block” style pumps. PGP/PGM 500 series pumps offer superior performance, high efficiency and low noise operation at high operating pressures. A wide variety of standard options are available to meet specific application requirements worldwide.
Gear Pumps
Direction of rotation is clockwise. Nominal displacement is between 4cm³/rev and 22.4cm³/rev for maximum working pressures. Seal material is NBR (nitrile rubber). Fluid working temperature range is -15°C to +80°C. Recommended fluid is mineral oil and recommended viscosity is 10mm²/s to 300mm²/s.