Teknik Belgeler
Özellikler
Marka
Phoenix ContactKontakların Sayısı
4
Hatve
7.5mm
Sıraların Sayısı
1
Montaj Tipi
Açık Delik
Cinsiyet
Erkek
Sonlandırma Yöntemi
Yaylı Bilezik Kabı
Tip
Terminal Bloğu
Akım Değeri
41A
Gövde Yönü
Yatay
Renk
Yeşil
Gerilim Değeri
1 kV
Seri
PLH 5/4-7.5-ZF
Derinlik
22.8mm
Uzunluk
34mm
Malzeme
Poliamit
Genişlik
37.1mm
Ürün Ayrıntıları
Phoenix Contact COMBICON PLH 7.5 mm PCB Terminal Blocks
The 7.5 mm pitch PLH series of Horizontal, PCB mounted, Terminal Blocks from Phoenix Contact feature a push-lock spring type connection with low actuation force lever operation.
The 7.5 mm PLH PCB Terminal Block can accept solid or stranded wire from 0.2 mm² to 6 mm² (24-10 AWG).
The rated current / cross section for the 7.5 mm PLH PCB Terminal Block is 41 A/6 mm².
The material Inflammability class is UL 94 V0 for the 7.5 mm PLH PCB Terminal Block.
The PCB requires a 2 mm diameter hole for the Zig-Zag pinning pattern of the 7.5 mm PLH Terminal Block.
Phoenix Contact COMBICON 7.5mm Pitch PCB Terminal Blocks
Teklif İsteyiniz
Each (In a Pack of 5) (KDV Hariç)
5
Teklif İsteyiniz
Each (In a Pack of 5) (KDV Hariç)
5
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
Phoenix ContactKontakların Sayısı
4
Hatve
7.5mm
Sıraların Sayısı
1
Montaj Tipi
Açık Delik
Cinsiyet
Erkek
Sonlandırma Yöntemi
Yaylı Bilezik Kabı
Tip
Terminal Bloğu
Akım Değeri
41A
Gövde Yönü
Yatay
Renk
Yeşil
Gerilim Değeri
1 kV
Seri
PLH 5/4-7.5-ZF
Derinlik
22.8mm
Uzunluk
34mm
Malzeme
Poliamit
Genişlik
37.1mm
Ürün Ayrıntıları
Phoenix Contact COMBICON PLH 7.5 mm PCB Terminal Blocks
The 7.5 mm pitch PLH series of Horizontal, PCB mounted, Terminal Blocks from Phoenix Contact feature a push-lock spring type connection with low actuation force lever operation.
The 7.5 mm PLH PCB Terminal Block can accept solid or stranded wire from 0.2 mm² to 6 mm² (24-10 AWG).
The rated current / cross section for the 7.5 mm PLH PCB Terminal Block is 41 A/6 mm².
The material Inflammability class is UL 94 V0 for the 7.5 mm PLH PCB Terminal Block.
The PCB requires a 2 mm diameter hole for the Zig-Zag pinning pattern of the 7.5 mm PLH Terminal Block.