Teknik Belgeler
Özellikler
Marka
Phoenix ContactBastırıcı Tipi
EMC Filtresi
Maksimum Gerilim Değeri
240 V ac
Montaj Tipi
DIN Rayı
Seri
NEF 1- 3
Uzunluk
25mm
Derinlik
84.2mm
Yükseklik
79.4mm
Boyutlar
25 x 84.2 x 79.4mm
Minimum Çalışma Sıcaklığı
-25°C
Maksimum Çalışma Sıcaklığı
+100°C
Menşe
Germany
Ürün Ayrıntıları
Phoenix Contact SFP TRAB EMC Filters
The Phoenix Contact SFP-TRAB series of EMC Filters have a combined protective circuit for absorbing transient surge voltages and high frequency interference voltages. This highly reliable series also features thermal monitoring of the protective circuit and disconnection status signal.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
4.957,64 TL
Each KDV Hariç
5.949,17 TL
Each KDV Dahil
1
4.957,64 TL
Each KDV Hariç
5.949,17 TL
Each KDV Dahil
1
Toptan Satın Al
Miktar | Birim Fiyat |
---|---|
1 - 9 | 4.957,64 TL |
10 - 24 | 4.463,57 TL |
25 - 49 | 4.018,52 TL |
50 - 99 | 3.618,19 TL |
100+ | 3.257,42 TL |
Teknik Belgeler
Özellikler
Marka
Phoenix ContactBastırıcı Tipi
EMC Filtresi
Maksimum Gerilim Değeri
240 V ac
Montaj Tipi
DIN Rayı
Seri
NEF 1- 3
Uzunluk
25mm
Derinlik
84.2mm
Yükseklik
79.4mm
Boyutlar
25 x 84.2 x 79.4mm
Minimum Çalışma Sıcaklığı
-25°C
Maksimum Çalışma Sıcaklığı
+100°C
Menşe
Germany
Ürün Ayrıntıları
Phoenix Contact SFP TRAB EMC Filters
The Phoenix Contact SFP-TRAB series of EMC Filters have a combined protective circuit for absorbing transient surge voltages and high frequency interference voltages. This highly reliable series also features thermal monitoring of the protective circuit and disconnection status signal.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.