Teknik Belgeler
Özellikler
Marka
Phoenix ContactBastırıcı Tipi
Ani Artış Durdurucu Koruma Modülü
Maksimum Gerilim Değeri
24 V dc
Montaj Tipi
DIN Rayı
Maksimum Ani Akım
20kA
Seri
LIT 1X2-24
Uzunluk
93.1mm
Derinlik
6.2mm
Yükseklik
102.5mm
Boyutlar
93.1 x 6.2 x 102.5mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+80°C
Menşe
Germany
Ürün Ayrıntıları
LINETRAB LIT Surge Protection
Phoenix Contact LineTrab LIT range of DIN rail mounted surge protection equipment for measurement and control technology. The LineTrab range has a design width of just 6.2 mm yet it is able to offer protection for up to four wires.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
3.904,31 TL
Each KDV Hariç
4.685,17 TL
Each KDV Dahil
1
3.904,31 TL
Each KDV Hariç
4.685,17 TL
Each KDV Dahil
1
Toptan Satın Al
Miktar | Birim Fiyat |
---|---|
1 - 4 | 3.904,31 TL |
5 - 9 | 3.748,65 TL |
10 - 24 | 3.553,86 TL |
25+ | 3.242,11 TL |
Teknik Belgeler
Özellikler
Marka
Phoenix ContactBastırıcı Tipi
Ani Artış Durdurucu Koruma Modülü
Maksimum Gerilim Değeri
24 V dc
Montaj Tipi
DIN Rayı
Maksimum Ani Akım
20kA
Seri
LIT 1X2-24
Uzunluk
93.1mm
Derinlik
6.2mm
Yükseklik
102.5mm
Boyutlar
93.1 x 6.2 x 102.5mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+80°C
Menşe
Germany
Ürün Ayrıntıları
LINETRAB LIT Surge Protection
Phoenix Contact LineTrab LIT range of DIN rail mounted surge protection equipment for measurement and control technology. The LineTrab range has a design width of just 6.2 mm yet it is able to offer protection for up to four wires.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.