Teknik Belgeler
Özellikler
Marka
Phoenix ContactBastırıcı Tipi
Ani Artış Durdurucu Koruma Modülü
Maksimum Gerilim Değeri
230 V ac
Montaj Tipi
Açık Delik
Maksimum Ani Akım
40kA
Seri
F-MS 12 ST
Uzunluk
52.5mm
Derinlik
17.4mm
Yükseklik
55.5mm
Boyutlar
52.5 x 17.4 x 55.5mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+80°C
Menşe
Germany
Ürün Ayrıntıları
Single & 3-phase Mains FLT & VAL Series
Pluggable modules on a fixed base element, for easy installation and fast replacement.
Standards
IEC 61643, VDE V 0185-3
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
2.552,22 TL
Each KDV Hariç
3.062,66 TL
Each KDV Dahil
1
2.552,22 TL
Each KDV Hariç
3.062,66 TL
Each KDV Dahil
1
Toptan Satın Al
Miktar | Birim Fiyat |
---|---|
1 - 9 | 2.552,22 TL |
10 - 24 | 2.297,66 TL |
25 - 49 | 2.068,47 TL |
50 - 99 | 1.862,07 TL |
100+ | 1.683,62 TL |
Teknik Belgeler
Özellikler
Marka
Phoenix ContactBastırıcı Tipi
Ani Artış Durdurucu Koruma Modülü
Maksimum Gerilim Değeri
230 V ac
Montaj Tipi
Açık Delik
Maksimum Ani Akım
40kA
Seri
F-MS 12 ST
Uzunluk
52.5mm
Derinlik
17.4mm
Yükseklik
55.5mm
Boyutlar
52.5 x 17.4 x 55.5mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+80°C
Menşe
Germany
Ürün Ayrıntıları
Single & 3-phase Mains FLT & VAL Series
Pluggable modules on a fixed base element, for easy installation and fast replacement.
Standards
IEC 61643, VDE V 0185-3
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.