Teknik Belgeler
Özellikler
Marka
Phoenix ContactBastırıcı Tipi
Koaksiyel Ani Artış Durdurucu
Maksimum Gerilim Değeri
195 V ac, 280 V dc
Montaj Tipi
Takılabilir
Maksimum Ani Akım
20kA
Seri
CN-UB-280DC-BB
Uzunluk
25mm
Derinlik
67mm
Yükseklik
25mm
Boyutlar
25 x 67 x 25mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Menşe
Germany
Ürün Ayrıntıları
Conduit System Surge Protection Device
Phoenix Contact screw on module for conduit systems, with two conductor protection for a 2-core floating signal circuit.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
6.276,57 TL
Each KDV Hariç
7.531,88 TL
Each KDV Dahil
1
6.276,57 TL
Each KDV Hariç
7.531,88 TL
Each KDV Dahil
1
Toptan Satın Al
Miktar | Birim Fiyat |
---|---|
1 - 4 | 6.276,57 TL |
5 - 9 | 6.026,53 TL |
10 - 19 | 5.713,98 TL |
20 - 29 | 5.213,90 TL |
30+ | 4.651,78 TL |
Teknik Belgeler
Özellikler
Marka
Phoenix ContactBastırıcı Tipi
Koaksiyel Ani Artış Durdurucu
Maksimum Gerilim Değeri
195 V ac, 280 V dc
Montaj Tipi
Takılabilir
Maksimum Ani Akım
20kA
Seri
CN-UB-280DC-BB
Uzunluk
25mm
Derinlik
67mm
Yükseklik
25mm
Boyutlar
25 x 67 x 25mm
Minimum Çalışma Sıcaklığı
-40°C
Maksimum Çalışma Sıcaklığı
+85°C
Menşe
Germany
Ürün Ayrıntıları
Conduit System Surge Protection Device
Phoenix Contact screw on module for conduit systems, with two conductor protection for a 2-core floating signal circuit.
Surge Protection Devices, SPDs (DIN-rail)
Voltage surges, often referred to as spikes or transients are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. The worst voltage spikes are usually caused by lightning strikes and can reach up to 6000V, with current surges of over 3000A. The maximum size of the let-through voltage and current inrush depends on the location within the building's wiring system. BS7671: 2011 Amendment 1 Sections 443 and 534 cover risk assessment and provides guidance on protection of electronic equipment for installation engineers to follow. The fullest information on lightning and surge protection comes from the BSEN 62305 series of standards.