Phoenix Contact ST Clipline Serisi Standart DIN Ray Klemensi, Yaylı Kelepçe, 800 V
Teknik Belgeler
Özellikler
Marka
Phoenix ContactRenk
Gri
Seviyelerin Sayısı
Tek
Amerikan Tel Ölçüsü
28 → 10Amerikan Kablo Ölçüsü
Seri
ST 4
Sonlandırma Yöntemi
Yaylı Kelepçe
Kablo CSA
0.2 → 6mm²
Gerilim Değeri
800 V
Akım Değeri
41A
Minimum Çalışma Sıcaklığı
-60°C
Maksimum Çalışma Sıcaklığı
+110°C
Karşılanan Standartlar
EAC
Model Numarası
ST 4
Menşe
Germany
Ürün Ayrıntıları
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
273,78 TL
54,756 TL Each (In a Pack of 5) (KDV Hariç)
328,54 TL
65,707 TL Each (In a Pack of 5) KDV Dahil
5
273,78 TL
54,756 TL Each (In a Pack of 5) (KDV Hariç)
328,54 TL
65,707 TL Each (In a Pack of 5) KDV Dahil
5
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
Phoenix ContactRenk
Gri
Seviyelerin Sayısı
Tek
Amerikan Tel Ölçüsü
28 → 10Amerikan Kablo Ölçüsü
Seri
ST 4
Sonlandırma Yöntemi
Yaylı Kelepçe
Kablo CSA
0.2 → 6mm²
Gerilim Değeri
800 V
Akım Değeri
41A
Minimum Çalışma Sıcaklığı
-60°C
Maksimum Çalışma Sıcaklığı
+110°C
Karşılanan Standartlar
EAC
Model Numarası
ST 4
Menşe
Germany
Ürün Ayrıntıları
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².