Through terminal block,din rail,ST2.5
Teknik Belgeler
Özellikler
Marka
Phoenix ContactÜrün Tipi
DIN Rayı Terminal Bloğu
Renk
Gri
Kolların Sayısı
4
Seri
ST 2.5-PE/3L
Gerilim
800 V
Minimum Tel Boyutu (AWG)
28 AWG
Kablo CSA
0.081 to 3.32 mm²
Sigortalı
Yok
Maksimum Tel Boyutu (AWG)
12 AWG
Terminal Blok Akımı
20A
Minimum Çalışma Sıcaklığı
-50°C
Sonlandırma Tipi
Spring Clamp
Maksimum Çalışma Sıcaklığı
110°C
Tehlikeli Alan Sertifikası
NO
Standartlar/Onaylar
IEC 60947-7-2, UL, IEC 60947-7-1, EAC, cULus, cUL, CSA
Menşe
Poland
Ürün Ayrıntıları
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Stok bilgileri geçici olarak kullanılamıyor.
Teklif İsteyiniz
Each (In a Pack of 5) (KDV Hariç)
5
Teklif İsteyiniz
Each (In a Pack of 5) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
5
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Teknik Belgeler
Özellikler
Marka
Phoenix ContactÜrün Tipi
DIN Rayı Terminal Bloğu
Renk
Gri
Kolların Sayısı
4
Seri
ST 2.5-PE/3L
Gerilim
800 V
Minimum Tel Boyutu (AWG)
28 AWG
Kablo CSA
0.081 to 3.32 mm²
Sigortalı
Yok
Maksimum Tel Boyutu (AWG)
12 AWG
Terminal Blok Akımı
20A
Minimum Çalışma Sıcaklığı
-50°C
Sonlandırma Tipi
Spring Clamp
Maksimum Çalışma Sıcaklığı
110°C
Tehlikeli Alan Sertifikası
NO
Standartlar/Onaylar
IEC 60947-7-2, UL, IEC 60947-7-1, EAC, cULus, cUL, CSA
Menşe
Poland
Ürün Ayrıntıları
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products