Phoenix Contact PT Clipline Serisi Topraklama Modüler Klemens, Tak-Çıkar
Teknik Belgeler
Özellikler
Marka
Phoenix ContactRenk
Yeşil/Sarı
Seviyelerin Sayısı
Tek
Amerikan Tel Ölçüsü
26 → 12Amerikan Kablo Ölçüsü
Seri
PT 2.5/1P-PE
Sonlandırma Yöntemi
Takılabilir
Kablo CSA
0.14 → 4mm²
Minimum Çalışma Sıcaklığı
-60°C
Maksimum Çalışma Sıcaklığı
+105°C
Karşılanan Standartlar
EAC
Model Numarası
PT 2,5/1P-PE
Menşe
Germany
Ürün Ayrıntıları
Pluggable Feed-Through Terminal Blocks with Push-In Connection
Pluggable modular terminal blocks with PT Push-In technology for the modular set-up of control cabinets and systems. The COMBI plug connectors with PIT Push-In connection can be used for signal as well as power wiring. Respective ground terminal blocks are available in the same shape as the basic terminal blocks.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
1.264,77 TL
126,477 TL Each (In a Pack of 10) (KDV Hariç)
1.517,72 TL
151,772 TL Each (In a Pack of 10) KDV Dahil
10
1.264,77 TL
126,477 TL Each (In a Pack of 10) (KDV Hariç)
1.517,72 TL
151,772 TL Each (In a Pack of 10) KDV Dahil
10
Teknik Belgeler
Özellikler
Marka
Phoenix ContactRenk
Yeşil/Sarı
Seviyelerin Sayısı
Tek
Amerikan Tel Ölçüsü
26 → 12Amerikan Kablo Ölçüsü
Seri
PT 2.5/1P-PE
Sonlandırma Yöntemi
Takılabilir
Kablo CSA
0.14 → 4mm²
Minimum Çalışma Sıcaklığı
-60°C
Maksimum Çalışma Sıcaklığı
+105°C
Karşılanan Standartlar
EAC
Model Numarası
PT 2,5/1P-PE
Menşe
Germany
Ürün Ayrıntıları
Pluggable Feed-Through Terminal Blocks with Push-In Connection
Pluggable modular terminal blocks with PT Push-In technology for the modular set-up of control cabinets and systems. The COMBI plug connectors with PIT Push-In connection can be used for signal as well as power wiring. Respective ground terminal blocks are available in the same shape as the basic terminal blocks.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.