Phoenix Contact PT 2.5-DIO/R-L Serisi Çok Katlı Klemens, İterek Takılabilen, 800 V
Teknik Belgeler
Özellikler
Marka
Phoenix ContactRenk
Gri
Seviyelerin Sayısı
Tek
Gerilim Değeri
800 V
Amerikan Tel Ölçüsü
26 → 12Amerikan Kablo Ölçüsü
Seri
PT 2.5-DIO/R-L
Sonlandırma Yöntemi
İterek Sokma
Kablo CSA
0.14 → 4mm²
Akım Değeri
500mA
Minimum Çalışma Sıcaklığı
-60°C
Maksimum Çalışma Sıcaklığı
+105°C
Karşılanan Standartlar
CSA, cULus, EAC
Model Numarası
5-DIO/R-L, PT 2
Distrelec Product Id
30401219
Menşe
Poland
Ürün Ayrıntıları
Diode and Lamp Terminal Blocks
Using the diode terminal blocks of the PT push-in connection terminal blocks makes it possible to solve a variety of switching tasks. The diode is integrated either from left to right or vice versa in the terminal housings. Three and four-conductor terminal blocks are also available for multi-conductor connections.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
994,36 TL
198,873 TL Each (In a Pack of 5) (KDV Hariç)
1.193,23 TL
238,648 TL Each (In a Pack of 5) KDV Dahil
5
994,36 TL
198,873 TL Each (In a Pack of 5) (KDV Hariç)
1.193,23 TL
238,648 TL Each (In a Pack of 5) KDV Dahil
5
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
Phoenix ContactRenk
Gri
Seviyelerin Sayısı
Tek
Gerilim Değeri
800 V
Amerikan Tel Ölçüsü
26 → 12Amerikan Kablo Ölçüsü
Seri
PT 2.5-DIO/R-L
Sonlandırma Yöntemi
İterek Sokma
Kablo CSA
0.14 → 4mm²
Akım Değeri
500mA
Minimum Çalışma Sıcaklığı
-60°C
Maksimum Çalışma Sıcaklığı
+105°C
Karşılanan Standartlar
CSA, cULus, EAC
Model Numarası
5-DIO/R-L, PT 2
Distrelec Product Id
30401219
Menşe
Poland
Ürün Ayrıntıları
Diode and Lamp Terminal Blocks
Using the diode terminal blocks of the PT push-in connection terminal blocks makes it possible to solve a variety of switching tasks. The diode is integrated either from left to right or vice versa in the terminal housings. Three and four-conductor terminal blocks are also available for multi-conductor connections.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.