P.M.A KS50 PID Sıcaklık Kontrol Cihazı, 3 Çıkışlı, 90 → 250 V ac , 48 x 96mm
Teknik Belgeler
Özellikler
Marka
P.M.ABesleme Gerilimi
90 → 250 V ac
Boyut
48 x 96mm
Çıkışların Sayısı
3
Minimum Çalışma Sıcaklığı
-20°C
Maksimum Çalışma Sıcaklığı
+65°C
Seri
KS50
Giriş Tipi
Akım, Dirençli Transdüser, Termokupl, Gerilim
Aralık
E5CC
Panel Derinliği
118mm
Menşe
United Kingdom
Ürün Ayrıntıları
PMA KS 50-1 Temperature Controller
The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.
The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.
The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants.
PMA Temperature Controllers
Teklif İsteyiniz
1
Teklif İsteyiniz
Stok bilgileri geçici olarak kullanılamıyor.
1
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
P.M.ABesleme Gerilimi
90 → 250 V ac
Boyut
48 x 96mm
Çıkışların Sayısı
3
Minimum Çalışma Sıcaklığı
-20°C
Maksimum Çalışma Sıcaklığı
+65°C
Seri
KS50
Giriş Tipi
Akım, Dirençli Transdüser, Termokupl, Gerilim
Aralık
E5CC
Panel Derinliği
118mm
Menşe
United Kingdom
Ürün Ayrıntıları
PMA KS 50-1 Temperature Controller
The universal KS 50-1 temperature controller is intended for precise and cost-effective control tasks. The instrument provides simple 2-point (on/off) control, continuous PID control or 3-point stepping control. The process value signal is connected via a universal input. A supplementary analog input can be used for heating current measurement or as an external set-point input.
The KS 50-1 has three process outputs that can be 3 relays or 2 relays plus a universal output. This universal output can be used for operating a solid-state relay, a continuous current/voltage output or to energize a two-wire transmitter. Optionally there are two additional optocoupler outputs that can be used freely.
The controller is suitable for a number of industry applications including: Furnaces and ovens, Burners and boilers, Plastics processing, Hot runners, Driers, Climatic chambers & Heat treatment plants.
PMA Temperature Controllers