Prysmian PE, Kablo Klipsi, Siyah, Çapı: 24mm
Teknik Belgeler
Özellikler
Marka
PrysmianKablo Klipsi/Kelepçe Stili
Kablo Klipsi
Maksimum Demet Çapı
24mm
Tutturma Yöntemi
Somun
Malzeme
PE
Renk
Siyah
Uzunluk
51mm
Genişlik
18 mm
Derinlik
31mm
Dimensions [L x W x D]
51 x 18 x 31mm
Boyutlar [U x G (x D)]
51 x 18 x 31mm
Menşe
United Kingdom
Ürün Ayrıntıları
Telcleat® Cable Cleats
Single hole fixing cleats, they are adjustable in diameter to accommodate a range of cable sizes. Manufactured from low density black polythene, which has good resistance to sunlight and a wide range of chemicals and oils.,Fixing Method - The cleat is opened up and placed around the cable so that the end of the cleat containing the slot will be in contact with the mounting surface. Except for stock no. 612-877, which should be reversed so that the slot is uppermost. In this case an M5 washer should be used to prevent the nut entering the slot in the cleat.
1.810,28 TL
1.810,28 TL 1 Box of 25 (KDV Hariç)
2.172,34 TL
2.172,34 TL 1 Box of 25 KDV Dahil
1
1.810,28 TL
1.810,28 TL 1 Box of 25 (KDV Hariç)
2.172,34 TL
2.172,34 TL 1 Box of 25 KDV Dahil
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
| Miktar | Birim Fiyat |
|---|---|
| 1 - 4 | 1.810,28 TL |
| 5+ | 1.718,24 TL |
Teknik Belgeler
Özellikler
Marka
PrysmianKablo Klipsi/Kelepçe Stili
Kablo Klipsi
Maksimum Demet Çapı
24mm
Tutturma Yöntemi
Somun
Malzeme
PE
Renk
Siyah
Uzunluk
51mm
Genişlik
18 mm
Derinlik
31mm
Dimensions [L x W x D]
51 x 18 x 31mm
Boyutlar [U x G (x D)]
51 x 18 x 31mm
Menşe
United Kingdom
Ürün Ayrıntıları
Telcleat® Cable Cleats
Single hole fixing cleats, they are adjustable in diameter to accommodate a range of cable sizes. Manufactured from low density black polythene, which has good resistance to sunlight and a wide range of chemicals and oils.,Fixing Method - The cleat is opened up and placed around the cable so that the end of the cleat containing the slot will be in contact with the mounting surface. Except for stock no. 612-877, which should be reversed so that the slot is uppermost. In this case an M5 washer should be used to prevent the nut entering the slot in the cleat.