In-Line Amplifier 2 Channel Pulse Shaper

RS Stok Numarası: 905-5254Marka: Red LionÜretici Parça Numarası: ASTC0000
brand-logo

Teknik Belgeler

Özellikler

Besleme Gerilimi

9 → 30 V dc

Toplam Yükseklik

114.3mm

Toplam Genişlik

22.9mm

Minimum Çalışma Sıcaklığı

-18°C

Montaj Tipi

Gömme Montaj

Maksimum Çalışma Sıcaklığı

+60°C

Menşe

United States

Ürün Ayrıntıları

ASTC Series Inline Pre Amplifier

The ASTC In-Line amplifier boosts magnetic pickup signals by a factor of more than 100, and also provides an NPN Open-Collector pulse output. Low speed input sensitivity is 20 millivolts which permits operation at 1/50th of the 1-Volt. The unit is epoxy-encapsulated in a 3/4" Diameter stainless steel shell, with overall dimensions of 0.9" depth x 4.5" length and includes Neoprene strain-reliefs on each end. In installations where long signal runs are to be made it is advisable to keep the ASTC close to the magnetic pickup and make the longer cable run with the output from the ASTC. Input and output cables should not be run in conduit, cable troughs, or bundles with power or control voltage lines.

Red Lion

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

P.O.A.

In-Line Amplifier 2 Channel Pulse Shaper

P.O.A.

In-Line Amplifier 2 Channel Pulse Shaper
Stok bilgileri geçici olarak kullanılamıyor.

Teknik Belgeler

Özellikler

Besleme Gerilimi

9 → 30 V dc

Toplam Yükseklik

114.3mm

Toplam Genişlik

22.9mm

Minimum Çalışma Sıcaklığı

-18°C

Montaj Tipi

Gömme Montaj

Maksimum Çalışma Sıcaklığı

+60°C

Menşe

United States

Ürün Ayrıntıları

ASTC Series Inline Pre Amplifier

The ASTC In-Line amplifier boosts magnetic pickup signals by a factor of more than 100, and also provides an NPN Open-Collector pulse output. Low speed input sensitivity is 20 millivolts which permits operation at 1/50th of the 1-Volt. The unit is epoxy-encapsulated in a 3/4" Diameter stainless steel shell, with overall dimensions of 0.9" depth x 4.5" length and includes Neoprene strain-reliefs on each end. In installations where long signal runs are to be made it is advisable to keep the ASTC close to the magnetic pickup and make the longer cable run with the output from the ASTC. Input and output cables should not be run in conduit, cable troughs, or bundles with power or control voltage lines.

Red Lion