RS PRO Raspberry Pi için Lehime Uygun Klemens Kart, 40 Kontaklı, 6mm Aralıklı, Dört Sıralı, 12 V

RS Stok Numarası: 123-4541Marka: RS PRO
brand-logo

Teknik Belgeler

Özellikler

Marka

RS Pro

Ürün Adı

Solder Tag Board with 40 Contacts for Raspberry Pi

Aksesuar Kategorisi

Prototipleme

Form Faktörü

Eklenti

Menşe

United Kingdom

Ürün Ayrıntıları

Solder Tag Board for Raspberry Pi

This solder tag board is designed to work with the Raspberry Pi. The terminals on the board match the pins on the Pi. With a total of 40 terminals it provides a simple means of soldering and de-soldering electronic components to the GPIO header when developing prototypes.

Ideal for electronics engineers developing prototypes and also helpful for electronics students and apprentices.

The holes in the tag board align with the mounting holes in the Pi allowing the tag board to be mounted beneath the Pi using an additional mounting kit consisting of 4 legs and 8 x 2mm Pozidriv screws. For the 4 leg mounting kit, please see RS 124-3364.

A central slot in the tag board allows a ribbon cable, connected to the Pi GPIO socket, to pass through. For a suitable ribbon with connector, please see RS 124-2929.

Stok bilgileri geçici olarak kullanılamıyor.

Ayrıntılı bilgi için iletşime geçiniz

Stok bilgileri geçici olarak kullanılamıyor.

P.O.A.

RS PRO Raspberry Pi için Lehime Uygun Klemens Kart, 40 Kontaklı, 6mm Aralıklı, Dört Sıralı, 12 V

P.O.A.

RS PRO Raspberry Pi için Lehime Uygun Klemens Kart, 40 Kontaklı, 6mm Aralıklı, Dört Sıralı, 12 V
Stok bilgileri geçici olarak kullanılamıyor.

Teknik Belgeler

Özellikler

Marka

RS Pro

Ürün Adı

Solder Tag Board with 40 Contacts for Raspberry Pi

Aksesuar Kategorisi

Prototipleme

Form Faktörü

Eklenti

Menşe

United Kingdom

Ürün Ayrıntıları

Solder Tag Board for Raspberry Pi

This solder tag board is designed to work with the Raspberry Pi. The terminals on the board match the pins on the Pi. With a total of 40 terminals it provides a simple means of soldering and de-soldering electronic components to the GPIO header when developing prototypes.

Ideal for electronics engineers developing prototypes and also helpful for electronics students and apprentices.

The holes in the tag board align with the mounting holes in the Pi allowing the tag board to be mounted beneath the Pi using an additional mounting kit consisting of 4 legs and 8 x 2mm Pozidriv screws. For the 4 leg mounting kit, please see RS 124-3364.

A central slot in the tag board allows a ribbon cable, connected to the Pi GPIO socket, to pass through. For a suitable ribbon with connector, please see RS 124-2929.