RS PRO Antistatik (ESD) Topraklama Terminali, 10 mm Saplama, 4 mm Saplama x 2
Teknik Belgeler
Özellikler
Marka
RS ProAksesuar Tipi
Toprak Yapıştırma Braketi
Konnektör Tipi
10 mm Saplama, 4 mm Saplama x 2
Sonlandırma Tipi
Halka Terminal
EN 61340-5-1 ile uyumludur
Yes
Kablo Uzunluğu
3m
Direnç
1mΩ
Kablo Stili
Doğru-Düz
Saplama Boyutu
10 mm, 4mm
Menşe
United Kingdom
Ürün Ayrıntıları
RS PRO Earth Bonding Brackets
Earth bonding brackets distribute electrical mains earth within the EPA. These RS PRO brackets come with 3 terminations, with individual 1 meg-ohm resistors.
This unit distinguishes between earth facility and earth bonding point.
An earth facility (EF) usually distributes the electrical mains earth or a dedicated ESD earth, (protective earth) within an EPA.
An earth bonding point (EBP or common ground point) ties together several elements of an EPA such as bench surface, floor mat or wrist strap. In this manner, all are kept at the same electrical potential. In an EPA there may be several EBP but there must be only one EF.
Options available include:
287-7492 - Earth bonding bracket, 3 x 10 mm stud
287-7509 - Earth bonding bracket, 3 x 4 mm banana stud
298-3913 - Earth bonding bracket, 2 x 4 mm/1 x 10 mm stud
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
RS PRO have a great range of ESD grounding accessories including bonding plugs, bonding boxes, bonding brackets and cords plus many more to help eliminate the build up of static discharge which can be a risk to static sensitive components or devices.
Standards
Supports ESD S20.20 and EN 61340-5-1 ESD control programme compliance
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
2.255,436 TL
Each KDV Hariç
2.706,523 TL
Each KDV Dahil
1
2.255,436 TL
Each KDV Hariç
2.706,523 TL
Each KDV Dahil
1
Toptan Satın Al
Miktar | Birim Fiyat | |
---|---|---|
10 - 10 | 2.255,436 TL | 22.554,36 TL |
20+ | 2.184,936 TL | 21.849,36 TL |
Teknik Belgeler
Özellikler
Marka
RS ProAksesuar Tipi
Toprak Yapıştırma Braketi
Konnektör Tipi
10 mm Saplama, 4 mm Saplama x 2
Sonlandırma Tipi
Halka Terminal
EN 61340-5-1 ile uyumludur
Yes
Kablo Uzunluğu
3m
Direnç
1mΩ
Kablo Stili
Doğru-Düz
Saplama Boyutu
10 mm, 4mm
Menşe
United Kingdom
Ürün Ayrıntıları
RS PRO Earth Bonding Brackets
Earth bonding brackets distribute electrical mains earth within the EPA. These RS PRO brackets come with 3 terminations, with individual 1 meg-ohm resistors.
This unit distinguishes between earth facility and earth bonding point.
An earth facility (EF) usually distributes the electrical mains earth or a dedicated ESD earth, (protective earth) within an EPA.
An earth bonding point (EBP or common ground point) ties together several elements of an EPA such as bench surface, floor mat or wrist strap. In this manner, all are kept at the same electrical potential. In an EPA there may be several EBP but there must be only one EF.
Options available include:
287-7492 - Earth bonding bracket, 3 x 10 mm stud
287-7509 - Earth bonding bracket, 3 x 4 mm banana stud
298-3913 - Earth bonding bracket, 2 x 4 mm/1 x 10 mm stud
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
RS PRO have a great range of ESD grounding accessories including bonding plugs, bonding boxes, bonding brackets and cords plus many more to help eliminate the build up of static discharge which can be a risk to static sensitive components or devices.
Standards
Supports ESD S20.20 and EN 61340-5-1 ESD control programme compliance