NYLATRON Siyah PA Çubuk (Poliamid), 1m x 20mm Çaplı
Teknik Belgeler
Özellikler
Marka
RS ProRenk
Siyah
Uzunluk
1m
Malzeme
Naylon
Form
Rot
Çubuk Çapı
20mm
Yoğunluk
1.14g/cm³
Gerilme Dayanımı
75 MPa
Tutuşabilirlik Derecesi
UL 94 HB
Maksimum Çalışma Sıcaklığı
+170°C
Uzama
25%
Su Absorpsiyonu
7%
Menşe
Germany
Ürün Ayrıntıları
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
1.566,54 TL
1 Lot of 2 KDV Hariç
1.879,85 TL
1 Lot of 2 KDV Dahil
1
1.566,54 TL
1 Lot of 2 KDV Hariç
1.879,85 TL
1 Lot of 2 KDV Dahil
1
Toptan Satın Al
Miktar | Birim Fiyat |
---|---|
1 - 9 | 1.566,54 TL |
10+ | 1.387,24 TL |
Teknik Belgeler
Özellikler
Marka
RS ProRenk
Siyah
Uzunluk
1m
Malzeme
Naylon
Form
Rot
Çubuk Çapı
20mm
Yoğunluk
1.14g/cm³
Gerilme Dayanımı
75 MPa
Tutuşabilirlik Derecesi
UL 94 HB
Maksimum Çalışma Sıcaklığı
+170°C
Uzama
25%
Su Absorpsiyonu
7%
Menşe
Germany
Ürün Ayrıntıları
RS PRO Molybdenum Disulphide filled Nylon 66 Rod
A Nylon 66 rod optimised with a Molybdenum Disulphide for a low friction and self-lubricating engineering rod capable of handing high temperatures and high mechanical strength applications.
Nylon 66 is a high-performance thermoplastic with excellent mechanical properties. It has a high level of machineability, a high tensile strength, stiffness and a high level of heat resistance.
Unaffected by chlorinated hydrocarbons, impact resistant with a high abrasion and ultraviolet resistance the Nylon 66 rods are ideal for a wide range of uses. These include higher stress applications such as the creation of bushes, friction bearings, gears, wheels, and machine parts.
Nylatron® / MoS2 Filled Nylon
These materials are abrasion resistant and self-lubricating and have reasonably good chemical resistance to weak acids.