RS PRO Dişi Hidrolik Hızlı Bağlantı Kaplini, Karbon Çelik, Gromelle 6000 Serisi İle Uyumlu
Teknik Belgeler
Özellikler
Marka
RS ProDiş
BSP 1/2 Dişi
Bağlantı Cinsiyeti
Dişi
Diş Boyutu
1/2inç
Malzeme
Karbon Çelik
Seri
TGW
İle Uyumlu
Gromelle 6000 Serisi
Tip
Union
Kilitleme Stili
Vidalı Kilit
Sızdırmazlık Elemanı Malzemesi
FMK
Diş Standardı
BSP
Diş Cinsiyeti
Dişi
Maksimum Çalışma Basıncı
750 bar
Maksimum Çalışma Sıcaklığı
+200°C
Minimum Çalışma Sıcaklığı
-10°C
Menşe
Italy
Ürün Ayrıntıları
High Pressure Screw Coupling - RS
RS High Pressure Screw Couplings with VITON® fluoroelastomer seals have been specially designed for hydraulic oil applications, are equivalent to Gromelle Series 6000 couplings, and are suitable for working temperatures between -10 to +200°C. The high pressure RS hydraulic couplings are manufactured from carbon steel, incorporate a back-up PTFE sealing ring, and carbon steel springs.
Warning
RS High Pressure Screw Couplings should not be connected or disconnected where pressure exists in the hydraulic circuit. Protective equipment should be worn, such as RS Nitrile Rubber gloves (475-722), eye protection such as the Scott Browguard eye/face shield (705-6621) or similar.
Screw Locking
Couplings manufactured to ISO standards and fitted with NBR (Nitrile) or VITON® seals, with secondary PTFE seals for backup purposes. Suitable for working environments within -25 to 100°C (+125°C for PVVM and VVS series), and -10 to +200°C for VITON-seal screw couplings.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Teknik Belgeler
Özellikler
Marka
RS ProDiş
BSP 1/2 Dişi
Bağlantı Cinsiyeti
Dişi
Diş Boyutu
1/2inç
Malzeme
Karbon Çelik
Seri
TGW
İle Uyumlu
Gromelle 6000 Serisi
Tip
Union
Kilitleme Stili
Vidalı Kilit
Sızdırmazlık Elemanı Malzemesi
FMK
Diş Standardı
BSP
Diş Cinsiyeti
Dişi
Maksimum Çalışma Basıncı
750 bar
Maksimum Çalışma Sıcaklığı
+200°C
Minimum Çalışma Sıcaklığı
-10°C
Menşe
Italy
Ürün Ayrıntıları
High Pressure Screw Coupling - RS
RS High Pressure Screw Couplings with VITON® fluoroelastomer seals have been specially designed for hydraulic oil applications, are equivalent to Gromelle Series 6000 couplings, and are suitable for working temperatures between -10 to +200°C. The high pressure RS hydraulic couplings are manufactured from carbon steel, incorporate a back-up PTFE sealing ring, and carbon steel springs.
Warning
RS High Pressure Screw Couplings should not be connected or disconnected where pressure exists in the hydraulic circuit. Protective equipment should be worn, such as RS Nitrile Rubber gloves (475-722), eye protection such as the Scott Browguard eye/face shield (705-6621) or similar.
Screw Locking
Couplings manufactured to ISO standards and fitted with NBR (Nitrile) or VITON® seals, with secondary PTFE seals for backup purposes. Suitable for working environments within -25 to 100°C (+125°C for PVVM and VVS series), and -10 to +200°C for VITON-seal screw couplings.