Silikon Isıtıcı Matı, 176 W, 200 x 200 (Kare)mm, 240 V ac

Teknik Belgeler
Özellikler
Marka
RS ProMat Şekli
Kare
Güç Değeri
176 W
Dikdörtgen Mat Boyutu
200 x 200 (square)mm
Tepe Sıcaklık
+180°C
Besleme Gerilimi
240 V ac
Boyutlar
200 x 200 (square) mm
Menşe
United Kingdom
Ürün Ayrıntıları
3D Printer Heater Mats
Silicone heater mat technology delivers improved 3D Printer quality and speed of process. The heater mans are thin and lightweight and have a low thermal mass. Due to this low mass, the mats have rapid heat up characteristics and fast response to temperature control. The 3D heater mats wide operating temperature range, flexibility and superb electrical properties give it a distinct advantage over other forms of heating.
Within the heated build platform (HBP) of a 3D Printer, printing quality is improved by having the platform accurately and uniformly heated. As extruded plastic cools it shrinks slightly, when this shrinking process occurs unevenly the printed component can result in warped parts.
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.
Teklif İsteyiniz
1
Teklif İsteyiniz
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Marka
RS ProMat Şekli
Kare
Güç Değeri
176 W
Dikdörtgen Mat Boyutu
200 x 200 (square)mm
Tepe Sıcaklık
+180°C
Besleme Gerilimi
240 V ac
Boyutlar
200 x 200 (square) mm
Menşe
United Kingdom
Ürün Ayrıntıları
3D Printer Heater Mats
Silicone heater mat technology delivers improved 3D Printer quality and speed of process. The heater mans are thin and lightweight and have a low thermal mass. Due to this low mass, the mats have rapid heat up characteristics and fast response to temperature control. The 3D heater mats wide operating temperature range, flexibility and superb electrical properties give it a distinct advantage over other forms of heating.
Within the heated build platform (HBP) of a 3D Printer, printing quality is improved by having the platform accurately and uniformly heated. As extruded plastic cools it shrinks slightly, when this shrinking process occurs unevenly the printed component can result in warped parts.
Multi-Purpose Process Heaters
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them.
Warning
These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.