RS Pro, Tavan Montaj, 807mW, Çıta Montaj PIR Detektörü, PIR, 230 V ac
Teknik Belgeler
Özellikler
Ürün Ayrıntıları
Batten Mount PIR Detector IP65
This miniature PIR (passive infrared) presence detector provides automatic control of lighting loads. It is
specifically designed for mounting onto a batten style luminaire. The detector will switch incandescent, fluorescent, compact fluorescent and LED lighting.The unit detects movement using a PIR sensor and turns the load on. When an area is no longer occupied the load will switch off after a 10 minute time out period.
A selection of fixing washers are supplied to aid fixing to a variety of luminaires.
Occupancy Lighting Controllers
Lighting controllers designed for use within offices and warehouses. Available with dual sensors for detecting ambient light and physical movement. Outputs are in the form of switch contacts (standard types). A dimming control output version is available for use with electronic ballasts. This can control up to 10 ballasts, ideal where daylight compensation is required with constant ambient light.
3.404,13 TL
3.404,13 TL Each (KDV Hariç)
4.084,96 TL
4.084,96 TL Each KDV Dahil
1
3.404,13 TL
3.404,13 TL Each (KDV Hariç)
4.084,96 TL
4.084,96 TL Each KDV Dahil
1
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
Teknik Belgeler
Özellikler
Ürün Ayrıntıları
Batten Mount PIR Detector IP65
This miniature PIR (passive infrared) presence detector provides automatic control of lighting loads. It is
specifically designed for mounting onto a batten style luminaire. The detector will switch incandescent, fluorescent, compact fluorescent and LED lighting.The unit detects movement using a PIR sensor and turns the load on. When an area is no longer occupied the load will switch off after a 10 minute time out period.
A selection of fixing washers are supplied to aid fixing to a variety of luminaires.
Occupancy Lighting Controllers
Lighting controllers designed for use within offices and warehouses. Available with dual sensors for detecting ambient light and physical movement. Outputs are in the form of switch contacts (standard types). A dimming control output version is available for use with electronic ballasts. This can control up to 10 ballasts, ideal where daylight compensation is required with constant ambient light.