RS PRO Thermal Interface Pad, 0.127mm Thick, 2.5W/m·K, 128 x 72.5mm
Teknik Belgeler
Özellikler
Marka
RS ProBoyutlar
128 x 72.5mm
Kalınlık
0.127mm
Uzunluk
128mm
Genişlik
72.5mm
Termal İletkenlik
2.5W/m·K
Kendinden Yapışkanlı
No
Minimum Çalışma Sıcaklığı
-45°C
Maksimum Çalışma Sıcaklığı
+125°C
Renk
Gri
Çalışma Sıcaklığı Aralığı
-45 → +125°C
Menşe
United Kingdom
Ürün Ayrıntıları
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Teklif İsteyiniz
Each (In a Pack of 10) (KDV Hariç)
10
Teklif İsteyiniz
Each (In a Pack of 10) (KDV Hariç)
Stok bilgileri geçici olarak kullanılamıyor.
10
Stok bilgileri geçici olarak kullanılamıyor.
Teknik Belgeler
Özellikler
Marka
RS ProBoyutlar
128 x 72.5mm
Kalınlık
0.127mm
Uzunluk
128mm
Genişlik
72.5mm
Termal İletkenlik
2.5W/m·K
Kendinden Yapışkanlı
No
Minimum Çalışma Sıcaklığı
-45°C
Maksimum Çalışma Sıcaklığı
+125°C
Renk
Gri
Çalışma Sıcaklığı Aralığı
-45 → +125°C
Menşe
United Kingdom
Ürün Ayrıntıları
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.