RS PRO Beyaz Reflektif Bant, 25mm x 9m
Teknik Belgeler
Özellikler
Marka
RS ProTape Type
Reflektif Bant
Renk
Beyaz
Yapışkan Malzeme
Kauçuk
Genişlik
25mm
Uzunluk
9m
Maksimum Çalışma Sıcaklığı
+70°C
Minimum Çalışma Sıcaklığı
-40°C
Menşe
United Kingdom
Ürün Ayrıntıları
RS Pro Reflective Tape
The RS Pro white self-adhesive, vinyl reflective tape is the ideal solution for using indoors to mark pipes that represent a hazard.
The Twin-ply laminated tape consisting of a vinyl tape with pressure sensitive, permanent rubber resin adhesive. Use the reflective tape at junctions, valves (both sides) and bulkheads.
Industrial Tapes
Unmarked pipes represent a hazard. Marking them with tapes will identify and display their contents. Such identification is covered by BS 1710. The Health & Safety (Safety Signs and Signals) Regulations place great emphasis on the labelling of pipework. The Regulations state that pipeline marking tapes and labels are required for use at points where employees are likely to be exposed to the contents of the pipework, for example; sampling or filling points, drain valves and flanging joints.,BS 1710: 1984 Identification of Pipelines and Services and BS 4800 provide guidance on the use of different colours and safety signs to identify the contents of pipework and its associated risks.
Stok bilgileri geçici olarak kullanılamıyor.
Ayrıntılı bilgi için iletşime geçiniz
1.629,07 TL
Each KDV Hariç
1.954,88 TL
Each KDV Dahil
1
1.629,07 TL
Each KDV Hariç
1.954,88 TL
Each KDV Dahil
1
Teknik Belgeler
Özellikler
Marka
RS ProTape Type
Reflektif Bant
Renk
Beyaz
Yapışkan Malzeme
Kauçuk
Genişlik
25mm
Uzunluk
9m
Maksimum Çalışma Sıcaklığı
+70°C
Minimum Çalışma Sıcaklığı
-40°C
Menşe
United Kingdom
Ürün Ayrıntıları
RS Pro Reflective Tape
The RS Pro white self-adhesive, vinyl reflective tape is the ideal solution for using indoors to mark pipes that represent a hazard.
The Twin-ply laminated tape consisting of a vinyl tape with pressure sensitive, permanent rubber resin adhesive. Use the reflective tape at junctions, valves (both sides) and bulkheads.
Industrial Tapes
Unmarked pipes represent a hazard. Marking them with tapes will identify and display their contents. Such identification is covered by BS 1710. The Health & Safety (Safety Signs and Signals) Regulations place great emphasis on the labelling of pipework. The Regulations state that pipeline marking tapes and labels are required for use at points where employees are likely to be exposed to the contents of the pipework, for example; sampling or filling points, drain valves and flanging joints.,BS 1710: 1984 Identification of Pipelines and Services and BS 4800 provide guidance on the use of different colours and safety signs to identify the contents of pipework and its associated risks.